On 9/11/24 13:25, Dmitry Baryshkov wrote:
On Wed, Sep 11, 2024 at 01:03:37PM GMT, Sibi Sankar wrote:
Add initial support for x1e001de devkit platform. This includes:
-DSPs
-Ethernet (RTL8125BG) over the pcie 5 instance.
-NVme
-Wifi
-USB-C ports
Hey Dmitry,
Thanks for taking time to review the series!
Link: https://www.qualcomm.com/news/releases/2024/05/qualcomm-accelerates-development-for-copilot--pcs-with-snapdrago
Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 813 +++++++++++++++++++
2 files changed, 814 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index ae002c7cf126..1cbc7b91389d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -268,6 +268,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-display-card.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += x1e001de-devkit.dtb
dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
new file mode 100644
index 000000000000..07b4e60d9b66
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -0,0 +1,813 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. X1E001DE Snapdragon Devkit for Windows";
+ compatible = "qcom,x1e001de-devkit", "qcom,x1e001de", "qcom,x1e80100";
+
+ aliases {
+ serial0 = &uart21;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>,
+ <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+ /* Back panel port closer to the RJ45 connector */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ /* Back panel port closer to the audio jack */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ /* Front panel port */
+ connector@2 {
+ compatible = "usb-c-connector";
+ reg = <2>;
+ power-role = "dual";
+ data-role = "dual";
+
[trimmed]
+
+&pcie5 {
+ perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_wwan>;
Please use pwrseq instead.
+
+ pinctrl-0 = <&pcie5_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie5_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
Please use pwrseq instead.
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie6a_default>;
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/devkit/qcadsp8380.mbn",
+ "qcom/x1e80100/devkit/adsp_dtbs.elf";
qcom/SoC/Vendor/Device/foo.ext. Here the Vendor part is missing.
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/devkit/qccdsp8380.mbn",
+ "qcom/x1e80100/devkit/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+ status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, /* Unused */
+ <44 4>, /* SPI (TPM) */
+ <238 1>; /* UFS Reset */
A comment would be nice. Usually the GPIOs are reserved because
accessing them is forbidden by TZ / hyp. Is this the case for the Unused
GPIOs? And why is the UFS reset marked as reserved?
I went back and figured out that 34,35 and 238 are no longer reserved.
It might be the case for other devices as well. I'll fix that.
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie5_default: pcie5-default-state {
+ clkreq-n-pins {
+ pins = "gpio150";
+ function = "pcie5_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio149";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio151";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ wwan_sw_en: wwan-sw-en-state {
+ pins = "gpio221";
+ function = "gpio";
+ drive-strength = <4>;
+ bias-disable;
+ };
+};
+
+&uart21 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
All three USB-C connectors have data-role set to "dual". So this needs a
comment.
Docs show that only port0 supports DRD. Will fix it in v2.
-Sibi
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss2 {
+ status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss2_ss_in>;
+};
--
2.34.1
