On 6/26/2024 8:09 PM, Devi Priya wrote:
>
>
> On 6/25/2024 8:09 PM, Andrew Lunn wrote:
>>> +static struct clk_alpha_pll ubi32_pll_main = {
>>> + .offset = 0x28000,
>>> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
>>> + .flags = SUPPORTS_DYNAMIC_UPDATE,
>>> + .clkr = {
>>> + .hw.init = &(const struct clk_init_data) {
>>> + .name = "ubi32_pll_main",
>>> + .parent_data = &(const struct clk_parent_data) {
>>> + .index = DT_XO,
>>> + },
>>> + .num_parents = 1,
>>> + .ops = &clk_alpha_pll_huayra_ops,
>>> + },
>>> + },
>>> +};
>>> +
>>> +static struct clk_alpha_pll_postdiv ubi32_pll = {
>>> + .offset = 0x28000,
>>> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
>>> + .width = 2,
>>> + .clkr.hw.init = &(const struct clk_init_data) {
>>> + .name = "ubi32_pll",
>>> + .parent_hws = (const struct clk_hw *[]) {
>>> + &ubi32_pll_main.clkr.hw
>>> + },
>>> + .num_parents = 1,
>>> + .ops = &clk_alpha_pll_postdiv_ro_ops,
>>> + .flags = CLK_SET_RATE_PARENT,
>>> + },
>>> +};
>>
>> Can these structures be made const? You have quite a few different
>> structures in this driver, some of which are const, and some which are
>> not.
>>
> Sure, will check and update this in V6
>
> Thanks,
> Devi Priya
>> Andrew
>>
Hi Andrew,
Sorry for the delayed response.
The ubi32_pll_main structure should be passed to clk_alpha_pll_configure() API to configure UBI32 PLL. clk_alpha_pll_configure() API expects a non-const structure. Declaring it as const will result in the following compilation warning
drivers/clk/qcom/nsscc-ipq9574.c:3067:26: warning: passing argument 1 of ‘clk_alpha_pll_configure’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config);
^
In file included from drivers/clk/qcom/nsscc-ipq9574.c:22:0:
drivers/clk/qcom/clk-alpha-pll.h:200:6: note: expected ‘struct clk_alpha_pll *’ but argument is of type ‘const struct clk_alpha_pll *’
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
^~~~~~~~~~~~~~~~~~~~~~~
The ubi32_pll is the source for nss_cc_ubi0_clk_src, nss_cc_ubi1_clk_src, nss_cc_ubi2_clk_src, nss_cc_ubi3_clk_src. Therefore, to register ubi32_pll with clock framework, it should be assigned to UBI32_PLL index of nss_cc_ipq9574_clocks array. This assignment will result in the following compilation warning if the ubi32_pll structure is declared as const.
drivers/clk/qcom/nsscc-ipq9574.c:2893:16: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
[UBI32_PLL] = &ubi32_pll.clkr,
Thanks & Regards,
Manikanta.
