From: Angelo Dureghello <adureghello@xxxxxxxxxxxx> Changes to use FIELD_PREP, so that driver-specific ad3552r_field_prep is removed. Variables (arrays) that was used to call ad3552r_field_prep are removed too. Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx> --- drivers/iio/dac/ad3552r.c | 166 ++++++++++++++-------------------------------- 1 file changed, 49 insertions(+), 117 deletions(-) diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c index bd37d304ca70..c27706c5ba10 100644 --- a/drivers/iio/dac/ad3552r.c +++ b/drivers/iio/dac/ad3552r.c @@ -210,46 +210,6 @@ static const s32 gains_scaling_table[] = { [AD3552R_CH_GAIN_SCALING_0_125] = 125 }; -enum ad3552r_dev_attributes { - /* - Direct register values */ - /* From 0-3 */ - AD3552R_SDO_DRIVE_STRENGTH, - /* - * 0 -> Internal Vref, vref_io pin floating (default) - * 1 -> Internal Vref, vref_io driven by internal vref - * 2 or 3 -> External Vref - */ - AD3552R_VREF_SELECT, - /* Read registers in ascending order if set. Else descending */ - AD3552R_ADDR_ASCENSION, -}; - -enum ad3552r_ch_attributes { - /* DAC powerdown */ - AD3552R_CH_DAC_POWERDOWN, - /* DAC amplifier powerdown */ - AD3552R_CH_AMPLIFIER_POWERDOWN, - /* Select the output range. Select from enum ad3552r_ch_output_range */ - AD3552R_CH_OUTPUT_RANGE_SEL, - /* - * Over-rider the range selector in order to manually set the output - * voltage range - */ - AD3552R_CH_RANGE_OVERRIDE, - /* Manually set the offset voltage */ - AD3552R_CH_GAIN_OFFSET, - /* Sets the polarity of the offset. */ - AD3552R_CH_GAIN_OFFSET_POLARITY, - /* PDAC gain scaling */ - AD3552R_CH_GAIN_SCALING_P, - /* NDAC gain scaling */ - AD3552R_CH_GAIN_SCALING_N, - /* Rfb value */ - AD3552R_CH_RFB, - /* Channel select. When set allow Input -> DAC and Mask -> DAC */ - AD3552R_CH_SELECT, -}; - struct ad3552r_ch_data { s32 scale_int; s32 scale_dec; @@ -285,45 +245,6 @@ struct ad3552r_desc { unsigned int num_ch; }; -static const u16 addr_mask_map[][2] = { - [AD3552R_ADDR_ASCENSION] = { - AD3552R_REG_ADDR_INTERFACE_CONFIG_A, - AD3552R_MASK_ADDR_ASCENSION - }, - [AD3552R_SDO_DRIVE_STRENGTH] = { - AD3552R_REG_ADDR_INTERFACE_CONFIG_D, - AD3552R_MASK_SDO_DRIVE_STRENGTH - }, - [AD3552R_VREF_SELECT] = { - AD3552R_REG_ADDR_SH_REFERENCE_CONFIG, - AD3552R_MASK_REFERENCE_VOLTAGE_SEL - }, -}; - -/* 0 -> reg addr, 1->ch0 mask, 2->ch1 mask */ -static const u16 addr_mask_map_ch[][3] = { - [AD3552R_CH_DAC_POWERDOWN] = { - AD3552R_REG_ADDR_POWERDOWN_CONFIG, - AD3552R_MASK_CH_DAC_POWERDOWN(0), - AD3552R_MASK_CH_DAC_POWERDOWN(1) - }, - [AD3552R_CH_AMPLIFIER_POWERDOWN] = { - AD3552R_REG_ADDR_POWERDOWN_CONFIG, - AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(0), - AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(1) - }, - [AD3552R_CH_OUTPUT_RANGE_SEL] = { - AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE, - AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0), - AD3552R_MASK_CH_OUTPUT_RANGE_SEL(1) - }, - [AD3552R_CH_SELECT] = { - AD3552R_REG_ADDR_CH_SELECT_16B, - AD3552R_MASK_CH(0), - AD3552R_MASK_CH(1) - } -}; - static u8 _ad3552r_reg_len(u8 addr) { switch (addr) { @@ -399,11 +320,6 @@ static int ad3552r_read_reg(struct ad3552r_desc *dac, u8 addr, u16 *val) return 0; } -static u16 ad3552r_field_prep(u16 val, u16 mask) -{ - return (val << __ffs(mask)) & mask; -} - /* Update field of a register, shift val if needed */ static int ad3552r_update_reg_field(struct ad3552r_desc *dac, u8 addr, u16 mask, u16 val) @@ -416,21 +332,11 @@ static int ad3552r_update_reg_field(struct ad3552r_desc *dac, u8 addr, u16 mask, return ret; reg &= ~mask; - reg |= ad3552r_field_prep(val, mask); + reg |= val; return ad3552r_write_reg(dac, addr, reg); } -static int ad3552r_set_ch_value(struct ad3552r_desc *dac, - enum ad3552r_ch_attributes attr, - u8 ch, - u16 val) -{ - /* Update register related to attributes in chip */ - return ad3552r_update_reg_field(dac, addr_mask_map_ch[attr][0], - addr_mask_map_ch[attr][ch + 1], val); -} - #define AD3552R_CH_DAC(_idx) ((struct iio_chan_spec) { \ .type = IIO_VOLTAGE, \ .output = true, \ @@ -510,8 +416,14 @@ static int ad3552r_write_raw(struct iio_dev *indio_dev, val); break; case IIO_CHAN_INFO_ENABLE: - err = ad3552r_set_ch_value(dac, AD3552R_CH_DAC_POWERDOWN, - chan->channel, !val); + if (chan->channel == 0) + val = FIELD_PREP(AD3552R_MASK_CH_DAC_POWERDOWN(0), !val); + else + val = FIELD_PREP(AD3552R_MASK_CH_DAC_POWERDOWN(1), !val); + + err = ad3552r_update_reg_field(dac, AD3552R_REG_ADDR_POWERDOWN_CONFIG, + AD3552R_MASK_CH_DAC_POWERDOWN(chan->channel), + val); break; default: err = -EINVAL; @@ -715,9 +627,9 @@ static int ad3552r_reset(struct ad3552r_desc *dac) } return ad3552r_update_reg_field(dac, - addr_mask_map[AD3552R_ADDR_ASCENSION][0], - addr_mask_map[AD3552R_ADDR_ASCENSION][1], - val); + AD3552R_REG_ADDR_INTERFACE_CONFIG_A, + AD3552R_MASK_ADDR_ASCENSION, + FIELD_PREP(AD3552R_MASK_ADDR_ASCENSION, val)); } static void ad3552r_get_custom_range(struct ad3552r_desc *dac, s32 i, s32 *v_min, @@ -812,20 +724,20 @@ static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac, "mandatory custom-output-range-config property missing\n"); dac->ch_data[ch].range_override = 1; - reg |= ad3552r_field_prep(1, AD3552R_MASK_CH_RANGE_OVERRIDE); + reg |= FIELD_PREP(AD3552R_MASK_CH_RANGE_OVERRIDE, 1); err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-p", &val); if (err) return dev_err_probe(dev, err, "mandatory adi,gain-scaling-p property missing\n"); - reg |= ad3552r_field_prep(val, AD3552R_MASK_CH_GAIN_SCALING_P); + reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_P, val); dac->ch_data[ch].p = val; err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-n", &val); if (err) return dev_err_probe(dev, err, "mandatory adi,gain-scaling-n property missing\n"); - reg |= ad3552r_field_prep(val, AD3552R_MASK_CH_GAIN_SCALING_N); + reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_N, val); dac->ch_data[ch].n = val; err = fwnode_property_read_u32(gain_child, "adi,rfb-ohms", &val); @@ -841,9 +753,9 @@ static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac, dac->ch_data[ch].gain_offset = val; offset = abs((s32)val); - reg |= ad3552r_field_prep((offset >> 8), AD3552R_MASK_CH_OFFSET_BIT_8); + reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_BIT_8, (offset >> 8)); - reg |= ad3552r_field_prep((s32)val < 0, AD3552R_MASK_CH_OFFSET_POLARITY); + reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_POLARITY, (s32)val < 0); addr = AD3552R_REG_ADDR_CH_GAIN(ch); err = ad3552r_write_reg(dac, addr, offset & AD3552R_MASK_CH_OFFSET_BITS_0_7); @@ -886,9 +798,9 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac) } err = ad3552r_update_reg_field(dac, - addr_mask_map[AD3552R_VREF_SELECT][0], - addr_mask_map[AD3552R_VREF_SELECT][1], - val); + AD3552R_REG_ADDR_SH_REFERENCE_CONFIG, + AD3552R_MASK_REFERENCE_VOLTAGE_SEL, + FIELD_PREP(AD3552R_MASK_REFERENCE_VOLTAGE_SEL, val)); if (err) return err; @@ -900,9 +812,9 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac) } err = ad3552r_update_reg_field(dac, - addr_mask_map[AD3552R_SDO_DRIVE_STRENGTH][0], - addr_mask_map[AD3552R_SDO_DRIVE_STRENGTH][1], - val); + AD3552R_REG_ADDR_INTERFACE_CONFIG_D, + AD3552R_MASK_SDO_DRIVE_STRENGTH, + FIELD_PREP(AD3552R_MASK_SDO_DRIVE_STRENGTH, val)); if (err) return err; } @@ -938,9 +850,15 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac) "Invalid adi,output-range-microvolt value\n"); val = err; - err = ad3552r_set_ch_value(dac, - AD3552R_CH_OUTPUT_RANGE_SEL, - ch, val); + if (ch == 0) + val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0), val); + else + val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(1), val); + + err = ad3552r_update_reg_field(dac, + AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE, + AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch), + val); if (err) return err; @@ -958,7 +876,14 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac) ad3552r_calc_gain_and_offset(dac, ch); dac->enabled_ch |= BIT(ch); - err = ad3552r_set_ch_value(dac, AD3552R_CH_SELECT, ch, 1); + if (ch == 0) + val = FIELD_PREP(AD3552R_MASK_CH(0), 1); + else + val = FIELD_PREP(AD3552R_MASK_CH(1), 1); + + err = ad3552r_update_reg_field(dac, + AD3552R_REG_ADDR_CH_SELECT_16B, + AD3552R_MASK_CH(ch), val); if (err < 0) return err; @@ -970,8 +895,15 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac) /* Disable unused channels */ for_each_clear_bit(ch, &dac->enabled_ch, dac->model_data->num_hw_channels) { - err = ad3552r_set_ch_value(dac, AD3552R_CH_AMPLIFIER_POWERDOWN, - ch, 1); + if (ch == 0) + val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0), 1); + else + val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(1), 1); + + err = ad3552r_update_reg_field(dac, + AD3552R_REG_ADDR_POWERDOWN_CONFIG, + AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch), + val); if (err) return err; } -- 2.45.0.rc1