Re: [PATCH 4/5] mfd: axp20x: Add support for AXP323

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 3, 2024 at 7:15 PM Andre Przywara <andre.przywara@xxxxxxx> wrote:
>
> The X-Powers AXP323 is a very close sibling of the AXP313A. The only
> difference seems to be the ability to dual-phase the first two DC/DC
> converter, which adds another register.
>
> Add the required boilerplate to introduce a new PMIC to the AXP MFD
> driver. Where possible, this just maps into the existing structs defined
> for the AXP313A, only deviating where needed.
>
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
>  drivers/mfd/axp20x-i2c.c   |  1 +
>  drivers/mfd/axp20x.c       | 26 ++++++++++++++++++++++++++
>  include/linux/mfd/axp20x.h |  2 ++
>  3 files changed, 29 insertions(+)
>
> diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
> index 791a0b4cb64b..5c93136f977e 100644
> --- a/drivers/mfd/axp20x-i2c.c
> +++ b/drivers/mfd/axp20x-i2c.c
> @@ -65,6 +65,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
>         { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
>         { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
>         { .compatible = "x-powers,axp313a", .data = (void *)AXP313A_ID },
> +       { .compatible = "x-powers,axp323", .data = (void *)AXP323_ID },
>         { .compatible = "x-powers,axp717", .data = (void *)AXP717_ID },
>         { .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
>         { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index bc08ae433260..8d90962b56d9 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -42,6 +42,7 @@ static const char * const axp20x_model_names[] = {
>         [AXP223_ID] = "AXP223",
>         [AXP288_ID] = "AXP288",
>         [AXP313A_ID] = "AXP313a",
> +       [AXP323_ID] = "AXP323",
>         [AXP717_ID] = "AXP717",
>         [AXP803_ID] = "AXP803",
>         [AXP806_ID] = "AXP806",
> @@ -193,6 +194,10 @@ static const struct regmap_range axp313a_writeable_ranges[] = {
>         regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
>  };
>
> +static const struct regmap_range axp323_writeable_ranges[] = {
> +       regmap_reg_range(AXP313A_ON_INDICATE, AXP323_DCDC_MODE_CTRL2),
> +};
> +
>  static const struct regmap_range axp313a_volatile_ranges[] = {
>         regmap_reg_range(AXP313A_SHUTDOWN_CTRL, AXP313A_SHUTDOWN_CTRL),
>         regmap_reg_range(AXP313A_IRQ_STATE, AXP313A_IRQ_STATE),
> @@ -203,6 +208,11 @@ static const struct regmap_access_table axp313a_writeable_table = {
>         .n_yes_ranges = ARRAY_SIZE(axp313a_writeable_ranges),
>  };
>
> +static const struct regmap_access_table axp323_writeable_table = {
> +       .yes_ranges = axp323_writeable_ranges,
> +       .n_yes_ranges = ARRAY_SIZE(axp323_writeable_ranges),
> +};
> +
>  static const struct regmap_access_table axp313a_volatile_table = {
>         .yes_ranges = axp313a_volatile_ranges,
>         .n_yes_ranges = ARRAY_SIZE(axp313a_volatile_ranges),
> @@ -433,6 +443,15 @@ static const struct regmap_config axp313a_regmap_config = {
>         .cache_type = REGCACHE_MAPLE,
>  };
>
> +static const struct regmap_config axp323_regmap_config = {
> +       .reg_bits = 8,
> +       .val_bits = 8,
> +       .wr_table = &axp323_writeable_table,
> +       .volatile_table = &axp313a_volatile_table,
> +       .max_register = AXP323_DCDC_MODE_CTRL2,
> +       .cache_type = REGCACHE_RBTREE,

Maple tree instead?

The rest looks fine, so once fixed,

Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>

> +};
> +
>  static const struct regmap_config axp717_regmap_config = {
>         .reg_bits = 8,
>         .val_bits = 8,
> @@ -1221,6 +1240,7 @@ static int axp20x_power_off(struct sys_off_data *data)
>         unsigned int shutdown_reg;
>
>         switch (axp20x->variant) {
> +       case AXP323_ID:
>         case AXP313A_ID:
>                 shutdown_reg = AXP313A_SHUTDOWN_CTRL;
>                 break;
> @@ -1289,6 +1309,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
>                 axp20x->regmap_cfg = &axp313a_regmap_config;
>                 axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
>                 break;
> +       case AXP323_ID:
> +               axp20x->nr_cells = ARRAY_SIZE(axp313a_cells);
> +               axp20x->cells = axp313a_cells;
> +               axp20x->regmap_cfg = &axp323_regmap_config;
> +               axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
> +               break;
>         case AXP717_ID:
>                 axp20x->nr_cells = ARRAY_SIZE(axp717_cells);
>                 axp20x->cells = axp717_cells;
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 79ecaaaa2070..c3df0e615fbf 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -19,6 +19,7 @@ enum axp20x_variants {
>         AXP223_ID,
>         AXP288_ID,
>         AXP313A_ID,
> +       AXP323_ID,
>         AXP717_ID,
>         AXP803_ID,
>         AXP806_ID,
> @@ -113,6 +114,7 @@ enum axp20x_variants {
>  #define AXP313A_SHUTDOWN_CTRL          0x1a
>  #define AXP313A_IRQ_EN                 0x20
>  #define AXP313A_IRQ_STATE              0x21
> +#define AXP323_DCDC_MODE_CTRL2         0x22
>
>  #define AXP717_ON_INDICATE             0x00
>  #define AXP717_PMU_STATUS_2            0x01
> --
> 2.25.1
>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux