Hi, The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel voltage and current, 16-Bit ADC with an I2C Interface. Compare to the previous iteration, this v2 series mainly: - Add a description in the binding - Fixed sign_extend32() parameter - Use dev_err_probe() - Remove scale and use processed channels Best regards, Herve Codina Changes v1 -> v2 v1: https://lore.kernel.org/lkml/20241001074618.350785-1-herve.codina@xxxxxxxxxxx/ - Patch 1 Add 'Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>' - Patch 2 Add a desccription for the 'osc' clock. - Patch 3 Replace sign_extend32(ret, 16) by sign_extend32(ret, 15). Use dev_err_probe(). Remove scale and use processed channels as values are read in IIO expected unit (mV or mA). - Patch 4 No changes Herve Codina (4): dt-bindings: vendor-prefixes: Add an entry for GE HealthCare dt-bindings: iio: adc: Add the GE HealthCare PMC ADC iio: adc: Add support for the GE HealthCare PMC ADC MAINTAINERS: add the GE HealthCare PMC ADC driver entry .../bindings/iio/adc/gehc,pmc-adc.yaml | 86 +++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 8 + drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/gehc-pmc-adc.c | 227 ++++++++++++++++++ include/dt-bindings/iio/adc/gehc,pmc-adc.h | 10 + 7 files changed, 344 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/gehc,pmc-adc.yaml create mode 100644 drivers/iio/adc/gehc-pmc-adc.c create mode 100644 include/dt-bindings/iio/adc/gehc,pmc-adc.h -- 2.46.1