The X-Powers AXP323 is a very close sibling of the AXP313A. The only difference seems to be the ability to dual-phase the first two DC/DC converters. Place the new AXP323 ID next to the existing AXP313A checks, to let them share most code. The only difference is the poly-phase detection code, which gets extended to check the respective bit in a newly used register. Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> --- drivers/regulator/axp20x-regulator.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 3ba76dbd0fb9..e3cc59b82ea6 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -1341,6 +1341,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) step = 150; break; case AXP313A_ID: + case AXP323_ID: case AXP717_ID: case AXP15060_ID: /* The DCDC PWM frequency seems to be fixed to 3 MHz. */ @@ -1527,6 +1528,15 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id) } break; + case AXP323_ID: + regmap_read(axp20x->regmap, AXP323_DCDC_MODE_CTRL2, ®); + + switch (id) { + case AXP313A_DCDC2: + return !!(reg & BIT(1)); + } + break; + default: return false; } @@ -1565,6 +1575,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev) "x-powers,drive-vbus-en"); break; case AXP313A_ID: + case AXP323_ID: regulators = axp313a_regulators; nregulators = AXP313A_REG_ID_MAX; break; -- 2.25.1