Add MIPI DSI and the associated PHY node to support DSI panels. Individual board device tree should enable the nodes as needed. Signed-off-by: Fei Shao <fshao@xxxxxxxxxxxx> --- (no changes since v1) arch/arm64/boot/dts/mediatek/mt8188.dtsi | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi index 23101d316c4e..719d2409a7db 100644 --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi @@ -1839,6 +1839,16 @@ pcieport: pcie-phy@0 { }; }; + mipi_tx_phy: dsi-phy@11c80000 { + compatible = "mediatek,mt8188-mipi-tx", "mediatek,mt8183-mipi-tx"; + reg = <0 0x11c80000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + i2c1: i2c@11e00000 { compatible = "mediatek,mt8188-i2c"; reg = <0 0x11e00000 0 0x1000>, @@ -2224,10 +2234,26 @@ larb19: smi@1a010000 { mediatek,smi = <&vdo_smi_common>; }; + disp_dsi: dsi@1c008000 { + compatible = "mediatek,mt8188-dsi"; + reg = <0 0x1c008000 0 0x1000>; + clocks = <&vdosys0 CLK_VDO0_DSI0>, + <&vdosys0 CLK_VDO0_DSI0_DSI>, + <&mipi_tx_phy>; + clock-names = "engine", "digital", "hs"; + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&mipi_tx_phy>; + phy-names = "dphy"; + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>; + resets = <&vdosys0 MT8188_VDO0_RST_DSI0>; + status = "disabled"; + }; + vdosys0: syscon@1c01d000 { compatible = "mediatek,mt8188-vdosys0", "syscon"; reg = <0 0x1c01d000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; mboxes = <&gce0 0 CMDQ_THR_PRIO_4>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xd000 0x1000>; }; -- 2.46.1.824.gd892dcdcdd-goog