From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
When the binding for the mailbox on PolarFire SoC was originally
written, and later modified, mistakes were made - and the precise
nature of the later modification should have been a giveaway, but alas
I was naive at the time.
A more correct modelling of the hardware is to use two syscons and have
a single reg entry for the mailbox, containing the mailbox region. The
two syscons contain the general control/status registers for the mailbox
and the interrupt related registers respectively. The reason for two
syscons is that the same mailbox is present on the non-SoC version of
the FPGA, which has no interrupt controller, and the shared part of the
rtl was unchanged between devices.
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
arch/riscv/boot/dts/microchip/mpfs.dtsi | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 9883ca3554c50..f8a45e4f00a0d 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -259,6 +259,11 @@ clkcfg: clkcfg@20002000 {
#reset-cells = <1>;
};
+ sysreg_scb: syscon@20003000 {
+ compatible = "microchip,mpfs-sysreg-scb", "syscon";
+ reg = <0x0 0x20003000 0x0 0x1000>;
+ };
+
ccc_se: clock-controller@38010000 {
compatible = "microchip,mpfs-ccc";
reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
@@ -521,10 +526,14 @@ usb: usb@20201000 {
status = "disabled";
};
- mbox: mailbox@37020000 {
+ control_scb: syscon@37020000 {
+ compatible = "microchip,mpfs-control-scb", "syscon", "simple-mfd";
+ reg = <0x0 0x37020000 0x0 0x100>;
+ };
+
+ mbox: mailbox@37020800 {
compatible = "microchip,mpfs-mailbox";
- reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
- <0x0 0x37020800 0x0 0x100>;
+ reg = <0x0 0x37020800 0x0 0x100>;
interrupt-parent = <&plic>;
interrupts = <96>;
#mbox-cells = <1>;
--
2.45.2
