On Thu, Sep 26, 2024 at 5:58 PM Ze Huang <18771902331@xxxxxxx> wrote: > This patch series introduces support for the pinctrl driver of the Canaan > K230 SoC. The K230 SoC features 64 IO pins, each of which can be configured > for up to five different functions. > > The controller manages the entire pin configuration and multiplexing > through a single register, which control features such as schmitt trigger, > drive strength, bias pull-up/down, input/output enable, power source, and > mux mode. > > The changes have been tested on CanMV-K230-V1.1 board. > > The pin function definition can be found here [1], and most of the DTS data > was converted from the vendor's code [2]. Bindings ACKed and patches look good to I applied patch 1 & 2 to the pin control tree. Please funnel patch 3 through the SoC tree. > prerequisite-message-id: <tencent_22BA0425B4DF1CA1713B62E4423C1BFBF809@xxxxxx> > prerequisite-patch-id: 704efc6e76814e1877748959d7319d558c8386c1 > prerequisite-patch-id: c2144cf468c57b856830a61615ba6ba501e8ec58 > prerequisite-patch-id: ced4a01ccd8ddab2fd308d543ddf47bd1641518a > prerequisite-patch-id: f8b983b301d0c14f1448b9e4c321262a509e061e > prerequisite-patch-id: 834b65b6a2b037daed5cffc6a41963622568dc9c > prerequisite-patch-id: 2401703b57448c9ea2c3dc7650b4502491a28944 I don't know about all this stuff but neither bindings or code seems to contain anything that won't compile so I just assume that any of these dependencies are purely for patch 3/3 and I nothing blocks me merging patches 1 & 2 so I just went ahead with that. Yours, Linus Walleij
