The MT8188 video decoder pipeline has two hardware IP blocks: LAT and
Core, which are powered by vdec0 and vdec1 power domains, respectively.
The hardware design includes a dependency between the vdec0 and vdec1
power domains to ensure that Core is powered down before LAT. Without
correctly describing this dependency in DT, the system will fail to
suspend.
As a comparable reference, MT8192 also uses the LAT + Core decoding
pipeline, and it has the correct power domain dependency defined in DT.
Update vdec1 as a sub-domain of vdec0 in MT8188 DT to reflect the
hardware design. Also, use more specific clock names for both power
domains.
Signed-off-by: Fei Shao <fshao@xxxxxxxxxxxx>
---
Changes in v2:
Revise commit message.
arch/arm64/boot/dts/mediatek/mt8188.dtsi | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 790315c1bdb3..ca50ed20fca0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -1062,20 +1062,22 @@ power-domain@MT8188_POWER_DOMAIN_VPPSYS1 {
#power-domain-cells = <0>;
};
- power-domain@MT8188_POWER_DOMAIN_VDEC1 {
- reg = <MT8188_POWER_DOMAIN_VDEC1>;
- clocks = <&vdecsys CLK_VDEC2_LARB1>;
- clock-names = "ss-vdec";
- mediatek,infracfg = <&infracfg_ao>;
- #power-domain-cells = <0>;
- };
-
power-domain@MT8188_POWER_DOMAIN_VDEC0 {
reg = <MT8188_POWER_DOMAIN_VDEC0>;
clocks = <&vdecsys_soc CLK_VDEC1_SOC_LARB1>;
- clock-names = "ss-vdec";
+ clock-names = "ss-vdec1-soc-l1";
mediatek,infracfg = <&infracfg_ao>;
- #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8188_POWER_DOMAIN_VDEC1 {
+ reg = <MT8188_POWER_DOMAIN_VDEC1>;
+ clocks = <&vdecsys CLK_VDEC2_LARB1>;
+ clock-names = "ss-vdec2-l1";
+ mediatek,infracfg = <&infracfg_ao>;
+ #power-domain-cells = <0>;
+ };
};
cam_vcore: power-domain@MT8188_POWER_DOMAIN_CAM_VCORE {
--
2.46.1.824.gd892dcdcdd-goog
