From: Ricky CX Wu <ricky.cx.wu.wiwynn@xxxxxxxxx>
Change the address of the I2C mux for two fan boards to 0x74
according to schematic.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@xxxxxxxxx>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 76 ++++++++++---------
1 file changed, 39 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 3ff22ec8de02..ecf012c9cbbc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -32,6 +32,8 @@ aliases {
i2c27 = &imux27;
i2c28 = &imux28;
i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
i2c34 = &imux34;
i2c35 = &imux35;
};
@@ -1062,6 +1064,8 @@ gpio@23 {
};
&i2c14 {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
adc@1d {
@@ -1122,20 +1126,50 @@ eeprom@51 {
reg = <0x51>;
};
- i2c-mux@71 {
- compatible = "nxp,pca9846";
+ i2c-mux@73 {
+ compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
idle-state = <0>;
i2c-mux-idle-disconnect;
- reg = <0x71>;
+ reg = <0x73>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ adc@35 {
+ compatible = "maxim,max11617";
+ reg = <0x35>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adc@35 {
+ compatible = "maxim,max11617";
+ reg = <0x35>;
+ };
+ };
+ };
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9546";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ imux30: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
adc@1f {
compatible = "ti,adc128d818";
reg = <0x1f>;
@@ -1183,10 +1217,10 @@ gpio@61 {
};
};
- i2c@1 {
+ imux31: i2c@1 {
+ reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0>;
adc@1f {
compatible = "ti,adc128d818";
@@ -1235,38 +1269,6 @@ gpio@61 {
};
};
};
-
- i2c-mux@73 {
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
-
- idle-state = <0>;
- i2c-mux-idle-disconnect;
- reg = <0x73>;
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- adc@35 {
- compatible = "maxim,max11617";
- reg = <0x35>;
- };
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- adc@35 {
- compatible = "maxim,max11617";
- reg = <0x35>;
- };
- };
- };
};
&i2c15 {
--
2.25.1
