Hi Heiko, On 2024-09-30 23:01, Heiko Stuebner wrote: > regulator-init-microvolt is not part of any regulator binding and is > only used in the Rockchip vendor kernel. So drop it. Mainline U-Boot is also a user of the regulator-init-microvolt prop, and use it to help configure an initial voltage on regulators during boot. Mostly useful for regulators that has different min / max voltage and is not enabled by default or set to an unexpected voltage on boot, e.g. the typical npu regulator on rk356x defaults to 0.5v, yet needs to be around 0.9v during npu probe. Maybe a better option would be to try add the init property to the Linux dt-bindning? https://source.denx.de/u-boot/u-boot/-/blob/master/doc/device-tree-bindings/regulator/regulator.txt#L40 Regards, Jonas > > Fixes: 007b4bb47f44 ("arm64: dts: rockchip: add dts for Firefly Station P2 aka rk3568-roc-pc") > Cc: Furkan Kardame <f.kardame@xxxxxxxxxxx> > Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> > --- > arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts > index e333449ead04..2fa89a0eeafc 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts > @@ -272,7 +272,6 @@ vdd_logic: DCDC_REG1 { > regulator-name = "vdd_logic"; > regulator-always-on; > regulator-boot-on; > - regulator-init-microvolt = <900000>; > regulator-initial-mode = <0x2>; > regulator-min-microvolt = <500000>; > regulator-max-microvolt = <1350000>; > @@ -285,7 +284,6 @@ regulator-state-mem { > > vdd_gpu: DCDC_REG2 { > regulator-name = "vdd_gpu"; > - regulator-init-microvolt = <900000>; > regulator-initial-mode = <0x2>; > regulator-min-microvolt = <500000>; > regulator-max-microvolt = <1350000>; > @@ -309,7 +307,6 @@ regulator-state-mem { > > vdd_npu: DCDC_REG4 { > regulator-name = "vdd_npu"; > - regulator-init-microvolt = <900000>; > regulator-initial-mode = <0x2>; > regulator-min-microvolt = <500000>; > regulator-max-microvolt = <1350000>;
