Currently, the compatible 'elgin,jg10309-01' is documented inside trivial-devices.yaml, but it does not fit well there as it requires extra properties such as spi-max-frequency, spi-cpha, and spi-cpol. This causes the following dt-schema warnings: make CHECK_DTBS=y rockchip/rv1108-elgin-r1.dtb -j12 DTC [C] arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb rv1108-elgin-r1.dtb:display@0: 'spi-cpha', 'spi-cpol' do not match any of the regexes: ... Fix this problem by introducing a specific binding for the Elgin JG10309-01 SPI-controlled display. Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- Changes since last version: - Resending with Krzysztof's Reviewed-by. Changes since v1: - None. Sent it to Mark as per Rob's suggestion. .../bindings/display/elgin,jg10309-01.yaml | 54 +++++++++++++++++++ .../devicetree/bindings/trivial-devices.yaml | 2 - 2 files changed, 54 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml diff --git a/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml b/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml new file mode 100644 index 000000000000..faca0cb3f154 --- /dev/null +++ b/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/elgin,jg10309-01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elgin JG10309-01 SPI-controlled display + +maintainers: + - Fabio Estevam <festevam@xxxxxxxxx> + +description: | + The Elgin JG10309-01 SPI-controlled display is used on the RV1108-Elgin-r1 + board and is a custom display. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: elgin,jg10309-01 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 24000000 + + spi-cpha: true + + spi-cpol: true + +required: + - compatible + - reg + - spi-cpha + - spi-cpol + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "elgin,jg10309-01"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + }; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 75a5fad08c44..2b675e97be3d 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -106,8 +106,6 @@ properties: - domintech,dmard09 # DMARD10: 3-axis Accelerometer - domintech,dmard10 - # Elgin SPI-controlled LCD - - elgin,jg10309-01 # MMA7660FC: 3-Axis Orientation/Motion Detection Sensor - fsl,mma7660 # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer -- 2.34.1
