From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
Add pinctrl settings for UART0 used as the default debug console on
both the Lichee Pi 4A and BeagleV Ahead boards.
Tested-by: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
---
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 26 ++++++++++++++++++++++
arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts | 26 ++++++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index 69f82e7afd0b..6c0b768e8d17 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -71,7 +71,33 @@ &sdio0 {
status = "okay";
};
+&padctrl0_apsys {
+ uart0_pins: uart0-0 {
+ tx-pins {
+ pins = "UART0_TXD";
+ function = "uart";
+ bias-disable;
+ drive-strength = <3>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ rx-pins {
+ pins = "UART0_RXD";
+ function = "uart";
+ bias-disable;
+ drive-strength = <1>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+};
+
&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
status = "okay";
};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
index 58ad381fc1c3..f60b1879192d 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -30,7 +30,33 @@ chosen {
};
};
+&padctrl0_apsys {
+ uart0_pins: uart0-0 {
+ tx-pins {
+ pins = "UART0_TXD";
+ function = "uart";
+ bias-disable;
+ drive-strength = <3>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ rx-pins {
+ pins = "UART0_RXD";
+ function = "uart";
+ bias-disable;
+ drive-strength = <1>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+};
+
&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
status = "okay";
};
--
2.34.1
