Dear All, This series adds whatever is required for supporting NMI, IRQ, and TINT interrupts to the Renesas RZ/V2H SoC. v1->v2: * Dropped patch "dt-bindings: pinctrl: renesas: rzg2l-pinctrl: Add interrupt-parent". * Patch "dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller" amended as per Rob's comments. * Patch "irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver" fixed missing put_device. Thanks, Fab Fabrizio Castro (5): pinctrl: renesas: rzg2l: Remove RZG2L_TINT_IRQ_START_INDEX dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller clk: renesas: r9a09g057: Add clock and reset entries for ICU irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver arm64: dts: renesas: r9a09g057: Add ICU node .../renesas,rzv2h-icu.yaml | 276 +++++++++ arch/arm64/boot/dts/renesas/r9a09g057.dtsi | 88 +++ drivers/clk/renesas/r9a09g057-cpg.c | 2 + drivers/irqchip/Kconfig | 7 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-renesas-rzv2h.c | 527 ++++++++++++++++++ drivers/pinctrl/renesas/pinctrl-rzg2l.c | 8 +- drivers/soc/renesas/Kconfig | 1 + 8 files changed, 908 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,rzv2h-icu.yaml create mode 100644 drivers/irqchip/irq-renesas-rzv2h.c -- 2.34.1