On Mon, Sep 30, 2024 at 02:18:14PM +0200, Rasmus Villemoes wrote:
> Christian Marangi <ansuelsmth@xxxxxxxxx> writes:
>
> > Document support for defining a partition table in the mmc-card node.
> >
> > This is needed if the eMMC doesn't have a partition table written and
> > the bootloader of the device load data by using absolute offset of the
> > block device. This is common on embedded device that have eMMC installed
> > to save space and have non removable block devices.
> >
> > If an OF partition table is detected, any partition table written in the
> > eMMC will be ignored and won't be parsed.
> >
> > eMMC provide a generic disk for user data and if supported (JEDEC 4.4+)
> > also provide two additional disk ("boot0" and "boot1") for special usage
> > of boot operation where normally is stored the bootloader or boot info.
> >
>
> This looks quite useful.
>
> Could this be extended to also be applicable to the four "general
> purpose" hardware partitions, i.e. what is exposed as /dev/mmcblkXgpY ?
> These would often also contain some fundamental boot data at various
> offsets but also, as for the boot partitions, often without a regular
> partition table.
>
> The eMMC spec consistently refers to the boot partitions as "boot
> partition 1" and "boot partition 2"; the boot0/boot1 naming is kind of a
> linux'ism. Similarly, the general purpose partitions are _almost_
> exclusively referred to as 1 through 4, except (at least in my copy),
> the heading for 7.4.89 says GP_SIZE_MULT_GP0 - GP_SIZE_MULT_GP3, but
> then goes on to describe GP_SIZE_MULT_1_y through GP_SIZE_MULT_4_y. So I
> wonder if on the binding level one should use partitions-{boot1,boot2}
> and, if implemented, partitions-{gp1,gp2,gp3,gp4} ?
>
Just to make sure, they are exposed as disk or char device? This is the
case of rpmb.
Adding support for this should be no-brainer as it's just a matter of
more case of the strends and more regex case on the binding.
I also notice the conflicting names, to adapt to JEDEC naming I will rename
the property to boot1 and boot2.
--
Ansuel
