RE: [PATCH 5/8] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Liu,

thanks for the patch.

> -----Original Message-----
> From: linux-arm-kernel <linux-arm-kernel-bounces@xxxxxxxxxxxxxxxxxxx> On Behalf Of Liu Ying
> Sent: Monday, September 30, 2024 6:29 AM
> Subject: [PATCH 5/8] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
> 
> Document ITE IT6263 LVDS to HDMI converter.
> 
> Product link:
> https://www.ite.com.tw/en/product/cate1/IT6263
> 
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> ---
>  .../bindings/display/bridge/ite,it6263.yaml   | 310 ++++++++++++++++++
>  1 file changed, 310 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> new file mode 100644
> index 000000000000..97fb81e5bc4a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> @@ -0,0 +1,310 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ITE IT6263 LVDS to HDMI converter
> +
> +maintainers:
> +  - Liu Ying <victor.liu@xxxxxxx>
> +
> +description: |
> +  The IT6263 is a high-performance single-chip De-SSC(De-Spread
> +Spectrum) LVDS
> +  to HDMI converter.  Combined with LVDS receiver and HDMI 1.4a
> +transmitter,
> +  the IT6263 supports LVDS input and HDMI 1.4 output by conversion function.
> +  The built-in LVDS receiver can support single-link and dual-link LVDS
> +inputs,
> +  and the built-in HDMI transmitter is fully compliant with HDMI
> +1.4a/3D, HDCP
> +  1.2 and backward compatible with DVI 1.0 specification.
> +
> +  The IT6263 also encodes and transmits up to 8 channels of I2S digital
> + audio,  with sampling rate up to 192KHz and sample size up to 24 bits.
> + In addition,  an S/PDIF input port takes in compressed audio of up to 192KHz frame rate.
> +
> +  The newly supported High-Bit Rate(HBR) audio by HDMI specifications
> + v1.3 is  provided by the IT6263 in two interfaces: the four I2S input
> + ports or the  S/PDIF input port.  With both interfaces the highest
> + possible HBR frame rate  is supported at up to 768KHz.
> +
> +properties:
> +  compatible:
> +    const: ite,it6263
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description: audio master clock
> +
> +  clock-names:
> +    const: mclk
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  ivdd-supply:
> +    description: 1.8V digital logic power
> +
> +  ovdd-supply:
> +    description: 3.3V I/O pin power
> +
> +  txavcc18-supply:
> +    description: 1.8V HDMI analog frontend power
> +
> +  txavcc33-supply:
> +    description: 3.3V HDMI analog frontend power
> +
> +  pvcc1-supply:
> +    description: 1.8V HDMI frontend core PLL power
> +
> +  pvcc2-supply:
> +    description: 1.8V HDMI frontend filter PLL power
> +
> +  avcc-supply:
> +    description: 3.3V LVDS frontend power
> +
> +  anvdd-supply:
> +    description: 1.8V LVDS frontend analog power
> +
> +  apvdd-supply:
> +    description: 1.8V LVDS frontend PLL power
> +
> +  "#sound-dai-cells":
> +    const: 0
> +
> +  ite,i2s-audio-fifo-sources:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 4
> +    items:
> +      enum: [0, 1, 2, 3]
> +    description:
> +      Each array element indicates the pin number of an I2S serial data input
> +      line which is connected to an audio FIFO, from audio FIFO0 to FIFO3.
> +
> +  ite,rl-channel-swap-audio-sources:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 4
> +    uniqueItems: true
> +    items:
> +      enum: [0, 1, 2, 3]
> +    description:
> +      Each array element indicates an audio source whose right channel and left
> +      channel are swapped by this converter. For I2S, the element is the pin
> +      number of an I2S serial data input line. For S/PDIF, the element is always
> +      0.
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    oneOf:
> +      - properties:
> +          port@0:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: the first LVDS input link
> +
> +          port@1: false
> +
> +          port@2:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: video port for the HDMI output
> +
> +          port@3:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: sound input port
> +
> +        required:
> +          - port@0
> +          - port@2
> +
> +      - properties:
> +          port@0:
> +            $ref: /schemas/graph.yaml#/$defs/port-base
> +            unevaluatedProperties: false
> +            description: the first LVDS input link
> +
> +            properties:
> +              dual-lvds-odd-pixels:
> +                type: boolean
> +                description: the first sink port for odd pixels
> +
> +              dual-lvds-even-pixels:
> +                type: boolean
> +                description: the first sink port for even pixels
> +
> +            oneOf:
> +              - required: [dual-lvds-odd-pixels]
> +              - required: [dual-lvds-even-pixels]
> +
> +          port@1:
> +            $ref: /schemas/graph.yaml#/$defs/port-base
> +            unevaluatedProperties: false
> +            description: the second LVDS input link
> +
> +            properties:
> +              dual-lvds-even-pixels:
> +                type: boolean
> +                description: the second sink port for even pixels
> +
> +              dual-lvds-odd-pixels:
> +                type: boolean
> +                description: the second sink port for odd pixels
> +
> +            oneOf:
> +              - required: [dual-lvds-even-pixels]
> +              - required: [dual-lvds-odd-pixels]


> +
> +          port@2:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: video port for the HDMI output
> +
> +          port@3:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: sound input port

What about single lvds as device support it?

Cheers,
Biju

> +
> +        required:
> +          - port@0
> +          - port@1
> +          - port@2
> +
> +        allOf:
> +          - if:
> +              properties:
> +                port@0:
> +                  required:
> +                    - dual-lvds-odd-pixels
> +            then:
> +              properties:
> +                port@1:
> +                  properties:
> +                    dual-lvds-odd-pixels: false
> +
> +          - if:
> +              properties:
> +                port@0:
> +                  required:
> +                    - dual-lvds-even-pixels
> +            then:
> +              properties:
> +                port@1:
> +                  properties:
> +                    dual-lvds-even-pixels: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - ivdd-supply
> +  - ovdd-supply
> +  - txavcc18-supply
> +  - txavcc33-supply
> +  - pvcc1-supply
> +  - pvcc2-supply
> +  - avcc-supply
> +  - anvdd-supply
> +  - apvdd-supply
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    /* single-link LVDS input */
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        hdmi@4c {
> +            compatible = "ite,it6263";
> +            reg = <0x4c>;
> +            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> +            ivdd-supply = <&reg_buck5>;
> +            ovdd-supply = <&reg_vext_3v3>;
> +            txavcc18-supply = <&reg_buck5>;
> +            txavcc33-supply = <&reg_vext_3v3>;
> +            pvcc1-supply = <&reg_buck5>;
> +            pvcc2-supply = <&reg_buck5>;
> +            avcc-supply = <&reg_vext_3v3>;
> +            anvdd-supply = <&reg_buck5>;
> +            apvdd-supply = <&reg_buck5>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +
> +                    it6263_lvds_link1: endpoint {
> +                        remote-endpoint = <&ldb_lvds_ch0>;
> +                    };
> +                };
> +
> +                port@2 {
> +                    reg = <2>;
> +
> +                    it6263_out: endpoint {
> +                        remote-endpoint = <&hdmi_in>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +
> +  - |
> +    /* dual-link LVDS input */
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        hdmi@4c {
> +            compatible = "ite,it6263";
> +            reg = <0x4c>;
> +            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> +            ivdd-supply = <&reg_buck5>;
> +            ovdd-supply = <&reg_vext_3v3>;
> +            txavcc18-supply = <&reg_buck5>;
> +            txavcc33-supply = <&reg_vext_3v3>;
> +            pvcc1-supply = <&reg_buck5>;
> +            pvcc2-supply = <&reg_buck5>;
> +            avcc-supply = <&reg_vext_3v3>;
> +            anvdd-supply = <&reg_buck5>;
> +            apvdd-supply = <&reg_buck5>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    dual-lvds-odd-pixels;
> +
> +                    it6263_lvds_link1_dual: endpoint {
> +                        remote-endpoint = <&ldb_lvds_ch0>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    dual-lvds-even-pixels;
> +
> +                    it6263_lvds_link2_dual: endpoint {
> +                        remote-endpoint = <&ldb_lvds_ch1>;
> +                    };
> +                };
> +
> +                port@2 {
> +                    reg = <2>;
> +
> +                    it6263_out_dual: endpoint {
> +                        remote-endpoint = <&hdmi_in>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> --
> 2.34.1
> 






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux