Hi, Here are a few pending patches for DRA7/ OMAP5 and patch hooking the GPIO fan to the thermal framework. Tested on BeagleBoard-X15, uEVM with next-20150320. (just load up cpufreq_dt and gpio_fan modules with omap2plus_defconfig, run cpuburn to generate thermal and just wait for the fan to trigger - and it does- we dont hit the frequency throttling temps) The patches are based on git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git branch: omap-for-v4.1/dt-v2 10709c0858d8 ARM: dts: Update Nanobone dts file The patch #3(gpio fan-thermal hookup) depends on (from linus master): 12ca7188468e thermal: Introduce dummy functions when thermal is not defined and the following currently in linux-next(next-20150320) queued for future. b5cf88e46bad (gpio-fan): Add thermal control hooks Keerthy (1): ARM: dts: DRA7: Add bandgap and related thermal nodes Nishanth Menon (1): ARM: dts: am57xx-beagle-x15: Add thermal map Tero Kristo (1): ARM: dts: OMAP5+: separate the cpu thermal zone definition from omap4 arch/arm/boot/dts/am57xx-beagle-x15.dts | 49 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/dra7.dtsi | 12 ++++++++ arch/arm/boot/dts/dra72x.dtsi | 9 ++++++ arch/arm/boot/dts/dra74x.dtsi | 9 ++++++ arch/arm/boot/dts/omap5-cpu-thermal.dtsi | 41 +++++++++++++++++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 6 files changed, 121 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/omap5-cpu-thermal.dtsi Regards, Nishanth Menon -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
