Add support for DH electronics i.MX8M Plus DHCOM SoM on PicoITX carrier board.
This system is populated with serial console, EQoS ethernet, eMMC, SD, SPI NOR,
LEDs and USB 3.0 host used in USB 2.0 mode on PicoITX.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
Cc: Hiago De Franco <hiago.franco@xxxxxxxxxxx>
Cc: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Cc: Joao Paulo Goncalves <joao.goncalves@xxxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
Cc: Max Merchel <Max.Merchel@xxxxxxxxxxxxxxx>
Cc: Michael Walle <mwalle@xxxxxxxxxx>
Cc: Peng Fan <peng.fan@xxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: imx@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx8mp-dhcom-picoitx.dts | 176 ++++++++++++++++++
2 files changed, 177 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f6b8041c1e8f7..4e33cb33ba297 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -170,6 +170,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-drc02.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts
new file mode 100644
index 0000000000000..703cf0fb3d2be
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023-2024 Marek Vasut <marex@xxxxxxx>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R204-F1638-SPI16-E-SD-RTC-T-RGB-I-01D2
+ * DHCOM PCB number: 660-200 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+ model = "DH electronics i.MX8M Plus DHCOM PicoITX";
+ compatible = "dh,imx8mp-dhcom-picoitx", "dh,imx8mp-dhcom-som",
+ "fsl,imx8mp";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ led {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_YELLOW>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+ pinctrl-0 = <&pinctrl_dhcom_i>;
+ pinctrl-names = "default";
+ };
+ };
+};
+
+&eqos { /* First ethernet */
+ pinctrl-0 = <&pinctrl_eqos_rmii>;
+ phy-handle = <ðphy0f>;
+ phy-mode = "rmii";
+
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+ <&clk IMX8MP_SYS_PLL2_100M>,
+ <&clk IMX8MP_SYS_PLL2_50M>;
+ assigned-clock-rates = <0>, <100000000>, <50000000>;
+};
+
+ðphy0g { /* Micrel KSZ9131RNXI */
+ status = "disabled";
+};
+
+ðphy0f { /* SMSC LAN8740Ai */
+ status = "okay";
+};
+
+&fec {
+ status = "disabled";
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "DHCOM-G", "", "", "",
+ "", "DHCOM-I", "PicoITX-HW0", "PicoITX-HW2",
+ "DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "PicoITX-HW1", "", "", "", "",
+ "", "", "", "", "DHCOM-INT", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "SOM-HW1", "", "", "", "",
+ "", "", "", "PicoITX-Out2", "", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "PicoITX-In2", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "", "", "PicoITX-In1", "PicoITX-Out1",
+ "", "", "", "", "", "", "", "";
+};
+
+/* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */
+&hdmi_blk_ctrl {
+ status = "disabled";
+};
+
+&hdmi_pvi {
+ status = "disabled";
+};
+
+&hdmi_tx {
+ status = "disabled";
+};
+
+&hdmi_tx_phy {
+ status = "disabled";
+};
+
+&irqsteer_hdmi {
+ status = "disabled";
+};
+
+&lcdif3 {
+ status = "disabled";
+};
+
+&pcie_phy {
+ status = "disabled";
+};
+
+&pcie {
+ status = "disabled";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&uart2 {
+ bluetooth {
+ status = "disabled";
+ };
+};
+
+/* USB_OTG port is not routed out on PicoITX. */
+&usb3_0 {
+ status = "disabled";
+};
+
+&usb_dwc3_0 {
+ status = "disabled";
+};
+
+&usb3_1 {
+ fsl,over-current-active-low;
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&usdhc1 {
+ status = "disabled";
+};
+
+&iomuxc {
+ /*
+ * The following DHCOM GPIOs are used on this board.
+ * Therefore, they have been removed from the list below.
+ * I: yellow led
+ */
+ pinctrl-0 = <&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+ &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_j
+ &pinctrl_dhcom_k &pinctrl_dhcom_l &pinctrl_dhcom_m
+ &pinctrl_dhcom_n &pinctrl_dhcom_o &pinctrl_dhcom_p
+ &pinctrl_dhcom_q &pinctrl_dhcom_r &pinctrl_dhcom_s
+ &pinctrl_dhcom_int>;
+};
--
2.45.2
