This device has an EC on i2c5 bus at address 0x76, driver for the EC was
added in a previous patch.
Signed-off-by: Maya Matuszczyk <maccraft123mc@xxxxxxxxx>
---
.../dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 3c13331a9ef4..63b627f60ec7 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -536,6 +536,22 @@ keyboard@3a {
};
};
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ embedded-controller@76 {
+ compatible = "lenovo,yoga-slim7x-ec";
+ reg = <0x76>;
+
+ interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&ec_int_n_default>;
+ pinctrl-names = "default";
+ };
+};
+
&i2c8 {
clock-frequency = <400000>;
@@ -794,6 +810,12 @@ &tlmm {
<44 4>, /* SPI (TPM) */
<238 1>; /* UFS Reset */
+ ec_int_n_default: ec-int-n-state {
+ pins = "gpio66";
+ function = "gpio";
+ bias-disable;
+ };
+
edp_reg_en: edp-reg-en-state {
pins = "gpio70";
function = "gpio";
--
2.45.2
