Drew Fustini wrote:
> From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
> [drew: change apb registers from syscon to second reg of gmac node]
> [drew: add phy reset delay properties for beaglev ahead]
> Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
> ---
> arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 91 ++++++++++++++
> .../boot/dts/thead/th1520-lichee-module-4a.dtsi | 135 +++++++++++++++++++++
> arch/riscv/boot/dts/thead/th1520.dtsi | 50 ++++++++
> 3 files changed, 276 insertions(+)
...
> diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> index ca84bc2039ef..d9d2e1f4dc68 100644
> --- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> @@ -11,6 +11,11 @@ / {
> model = "Sipeed Lichee Module 4A";
> compatible = "sipeed,lichee-module-4a", "thead,th1520";
>
> + aliases {
> + ethernet0 = &gmac0;
> + ethernet1 = &gmac1;
> + };
> +
> memory@0 {
> device_type = "memory";
> reg = <0x0 0x00000000 0x2 0x00000000>;
> @@ -25,6 +30,16 @@ &osc_32k {
> clock-frequency = <32768>;
> };
>
> +&dmac0 {
> + status = "okay";
> +};
> +
> +&aogpio {
> + gpio-line-names = "", "", "",
> + "GPIO00",
> + "GPIO04";
> +};
> +
These GPIO line names does not belong in this patch. They should
already be included in your other patchset adding the names for the
other lines.
/Emil
