Re: [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

Am Freitag, 27. September 2024, 09:30:30 CEST schrieb Krzysztof Kozlowski:
> On 27/09/2024 09:01, Frank Wang wrote:
> > Hi Krzysztof,
> > 
> > On 2024/9/26 22:19, Krzysztof Kozlowski wrote:
> >> On 26/09/2024 12:32, Frank Wang wrote:
> >>> +  - if:
> >>> +      properties:
> >>> +        compatible:
> >>> +          contains:
> >>> +            enum:
> >>> +              - rockchip,rk3576-usb2phy
> >>> +    then:
> >>> +      properties:
> >>> +        clocks:
> >>> +          minItems: 3
> >>> +          maxItems: 3
> >> Read one more time the example I gave you. Top-level constraints are
> >> saying max one clock.
> >>
> >> Best regards,
> >> Krzysztof
> >>
> > 
> > Sorry for overlooking this, I will set both "clocks" and "clock-names" 
> > to true, and add the else case below the above codes for the "old" SoCs.
> > Just like the below.
> > 
> > -  clocks:
> > -    maxItems: 1
> > +  clocks: true
> > 
> > -  clock-names:
> > -    const: phyclk
> > +  clock-names: true
> 
> For the third time, read the code I gave you. Do you see something like
> this there? Why doing all the time something different than existing code?

On vacation right now so late to the party, and somewhat confused :-) .

I've tried to find the code you mentioned, but did fail.
In [0] you mention "maybe oneOf". The other replies in that version were
about the ordering needing to stay for the older phy variants.

[1] in v2 has that NAK thing and [2] from v3 references that example again

I am probably just blind, but could use a pointer.


Because I think going with a
  - if:
      properties:
        compatible:
          contains:
            enum:
              - rockchip,rk3576-usb2phy
    then:
      properties:
        clocks:
          minItems: 3
          maxItems: 3
        clock-names:
          items:
            - const: phyclk
            - const: aclk
            - const: aclk_slv
    else:
      properties:
        clocks:
          maxItems: 1
        clock-names:
          const: phyclk

block should actually make sure each variant will check for the appropriate
number of clocks?

And having clocks:true in the main part then makes sure that the property
is not getting marked as:
arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dtb: usb2-phy@0: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
        from schema $id: http://devicetree.org/schemas/phy/rockchip,inno-usb2phy.yaml#


Heiko


[0] https://lore.kernel.org/lkml/snccizbw6thn3lhwad4xppp7vqii4p56ttl2gufwc3ke7vfckf@e4b7nvwwtdfr/
[1] https://lore.kernel.org/lkml/2a4200ac-3ea2-4449-94ac-c4b9f37ad800@xxxxxxxxxx/#t
[2] https://lore.kernel.org/lkml/ed829240-d4f7-471f-84f6-3509f87f11a1@xxxxxxxxxx/






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux