Hi Bryan, Thanks for the set. On Thu, Sep 26, 2024 at 04:46:38PM +0100, Bryan O'Donoghue wrote: > Add bindings for the already upstream OV08X40 to enable usage of this > sensor on dts based systems. > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> > --- > .../bindings/media/i2c/ovti,ov08x40.yaml | 130 +++++++++++++++++++++ > 1 file changed, 130 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml > new file mode 100644 > index 0000000000000000000000000000000000000000..250785f062d0146e8615d8f3e7700aebbd40b1dc > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml > @@ -0,0 +1,130 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (c) 2024 Linaro Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov08x40.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Omnivision OV08X40 CMOS Sensor > + > +maintainers: > + - Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> > + > +description: |- > + The Omnivision OV08X40 is a 9.2 megapixel, CMOS image sensor which supports. > + - Automatic black level calibration (ABLC) > + - Programmable controls for frame rate, mirror and flip, binning, cropping > + and windowing > + - Output formats 10-bit 4C RGB RAW, 10-bit Bayer RAW > + - 4-lane MIPI D-PHY TX @ 1 Gbps per lane > + - 2-lane MPIP D-PHY TX @ 2 Gbps per lane > + - Dynamic defect pixel cancellation > + - Standard SCCB command interface > + > +properties: > + compatible: > + const: ovti,ov08x40 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + description: > + Input clock for the sensor. > + items: > + - const: xvclk This seems redundant. > + > + clock-frequency: > + description: > + Frequency of the xvclk clock in Hertz. Could you instead use the frequency already set, using assigned-clock* in the example? > + > + avdd-supply: > + description: Analogue circuit voltage supply. > + > + dovdd-supply: > + description: I/O circuit voltage supply. > + > + dvdd-supply: > + description: Digital circuit voltage supply. > + > + reset-gpios: > + description: Active low GPIO connected to XSHUTDOWN pad of the sensor. > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + additionalProperties: false > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + oneOf: > + - items: > + - const: 1 > + - const: 2 > + - items: > + - const: 1 > + - const: 2 > + - const: 3 > + - const: 4 > + > + link-frequencies: true > + > + required: > + - data-lanes > + - link-frequencies > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - clock-frequency > + - dovdd-supply > + - avdd-supply > + - dvdd-supply > + - reset-gpios > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ov08x40: camera@36 { > + compatible = "ovti,ov08x40"; > + reg = <0x36>; > + > + reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&cam_rgb_defaultt>; > + > + clocks = <&ov08x40_clk>; > + clock-names = "xvclk"; > + clock-frequency = <19200000>; > + > + avdd-supply = <&vreg_l7b_2p8>; > + dvdd-supply = <&vreg_l7b_1p8>; > + dovdd-supply = <&vreg_l3m_1p8>; > + > + port { > + ov08x40_ep: endpoint { > + remote-endpoint = <&csiphy4_ep>; > + data-lanes = <1 2 3 4>; > + link-frequencies = /bits/ 64 <400000000>; > + }; > + }; > + }; > + }; > +... > -- Kind regards, Sakari Ailus
