Add dt bindings for AD7779 8-channel, simultaneous sampling ADC family with eight full Σ-Δ ADCs on chip and ultra-low input current to allow direct sensor connection. Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx> --- .../bindings/iio/adc/adi,ad7779.yaml | 110 ++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml new file mode 100644 index 000000000000..044f92f39cfa --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7779.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD777X family 8-Channel, 24-Bit, Simultaneous Sampling ADCs + +maintainers: + - Ramona Nechita <ramona.nechita@xxxxxxxxxx> + +description: | + The AD777X family consist of 8-channel, simultaneous sampling analog-to- + digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The + AD7771 provides an ultralow input current to allow direct sensor + connection. Each input channel has a programmable gain stage + allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor + outputs into the full-scale ADC input range, maximizing the + dynamic range of the signal chain. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7770.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7771.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7779.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad7770 + - adi,ad7771 + - adi,ad7779 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + maxItems: 1 + + avdd1-supply: + description: Front-End analog supply AVDD1. Can be used as conversion ref. + + avdd2-supply: + description: AVDD2 Analog Supply from 2.2 V to 3.6 V. + + avdd4-supply: + description: AVDD4 SAR Analog Supply and Reference Source. + + interrupts: + minItems: 1 + items: + - description: | + adc_rdy: Interrupt line for DRDY signal which indicates the end of + conversion independently of the interface selected to read back the + Σ-∆ conversion. + - description: | + Alert: The chip includes self diagnostic features to guarantee the + correct operation. If an error is detected, the ALERT pin is pulled + high to generate an external interruption to the controller. + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - adc_rdy + - alert + + start-gpios: + description: + Pin that controls start synchronization pulse. + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7779"; + reg = <0>; + start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>; + interrupt-parent = <&intc>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "adc_rdy"; + clocks = <&adc_clk>; + }; + }; +... -- 2.43.0
