R-Car Gen1 has an LBSC which has quite a different register set from the
former BSC. To match H1 with M1, rename the nodes to LBSC.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/renesas/r8a7778-bockw.dts | 2 +-
arch/arm/boot/dts/renesas/r8a7778.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/renesas/r8a7778-bockw.dts b/arch/arm/boot/dts/renesas/r8a7778-bockw.dts
index a3f9d74e8877..d79095470a02 100644
--- a/arch/arm/boot/dts/renesas/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/renesas/r8a7778-bockw.dts
@@ -61,7 +61,7 @@ sndcodec: simple-audio-card,codec {
};
};
-&bsc {
+&lbsc {
flash@0 {
compatible = "cfi-flash";
reg = <0x0 0x04000000>;
diff --git a/arch/arm/boot/dts/renesas/r8a7778.dtsi b/arch/arm/boot/dts/renesas/r8a7778.dtsi
index ab3e42bded8c..859dd29dfce3 100644
--- a/arch/arm/boot/dts/renesas/r8a7778.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7778.dtsi
@@ -40,7 +40,7 @@ aliases {
spi2 = &hspi2;
};
- bsc: bus {
+ lbsc: bus {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
2.45.2
