From: Jared McArthur <j-mcarthur@xxxxxx>
Commit 0d0a0b441346 ("arm64: dts: ti: k3-j7200: fix main pinmux
range") split the main_pmx0 into two nodes: main_pmx0 and main_pmx1
due to a non-addressable region, but incorrectly represented the
ranges. As a result, the memory map for the pinctrl is incorrect. Fix
this by introducing the correct ranges.
The ranges are taken from the J7200 TRM [1] (Table 5-695. CTRL_MMR0
Registers).
Padconfig starting addresses and ranges:
- 0 to 66: 0x11c000, 0x10c
- 68: 0x11c110, 0x004
- 71 to 73: 0x11c11c, 0x00c
- 89 to 90: 0x11c164, 0x008
The datasheet [2] doesn't contain PADCONFIG63 (Table 6-106. Pin
Multiplexing), but the pin is necessary for enabling the MMC1 CLKLP
pad loopback and should be included in the pinmux register map.
Due to the change in pinmux node addresses, change the pinmux node for
the USB0_DRVVBUS pin to main_pmx2. The offset has not changed since the
new main_pmx2 node has the same base address and range as the original
main_pmx1 node. All other pinmuxing done within J7200 dts or dtso files
only uses main_pmx0 which has not changed.
[1] https://www.ti.com/lit/pdf/spruiu1
[2] https://www.ti.com/lit/gpn/dra821u
Fixes: 0d0a0b441346 ("arm64: dts: ti: k3-j7200: fix main pinmux range")
Signed-off-by: Aniket Limaye <a-limaye@xxxxxx>
Signed-off-by: Jared McArthur <j-mcarthur@xxxxxx>
---
Changes in v2:
- Explains why PADCONFIG63 is included in the pinmux ranges when it
doesn't appear in the datasheet.
* Nishanth
- Use cannonical links in commit msg for the TRM and Datasheet
- Explains the reason for the offset not changing for the USB0_DRVVBUS
pin and why there are no changes to other pins.
- Link to v1: https://lore.kernel.org/all/20240829071208.2172825-1-a-limaye@xxxxxx/
---
.../dts/ti/k3-j7200-common-proc-board.dts | 2 +-
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 22 +++++++++++++++++--
2 files changed, 21 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 6593c5da82c06..df39f2b1ff6ba 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -254,7 +254,7 @@ J721E_IOPAD(0x38, PIN_OUTPUT, 0) /* (Y21) MCAN3_TX */
};
};
-&main_pmx1 {
+&main_pmx2 {
main_usbss0_pins_default: main-usbss0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 9386bf3ef9f68..41adfa64418d0 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -426,10 +426,28 @@ main_pmx0: pinctrl@11c000 {
pinctrl-single,function-mask = <0xffffffff>;
};
- main_pmx1: pinctrl@11c11c {
+ main_pmx1: pinctrl@11c110 {
compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
- reg = <0x00 0x11c11c 0x00 0xc>;
+ reg = <0x00 0x11c110 0x00 0x004>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_pmx2: pinctrl@11c11c {
+ compatible = "ti,j7200-padconf", "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x11c11c 0x00 0x00c>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_pmx3: pinctrl@11c164 {
+ compatible = "ti,j7200-padconf", "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x11c164 0x00 0x008>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
--
2.34.1
