On Wed, Sep 25, 2024 at 01:30:31PM +0200, Michal Vokáč wrote: > On 24. 09. 24 19:37, Marco Felsch wrote: > > Hi Frank, > > > > On 24-09-24, Frank Li wrote: > > > On Tue, Sep 24, 2024 at 12:39:41PM +0200, Michal Vokáč wrote: > > > > The IOTA2 Lumpy board is based on the i.MX8MPlus EVK. > > > > > > > > Basic features are: > > > > - 4GB LPDDR4 > > > > - 64GB eMMC > > > > - 2x 1GB Ethernet > > > > - USB 3.0 Type-C dual role port, without power delivery > > > > - USB 3.0 Type-A host port > > > > - RGB LED - PWM driven > > > > - speaker - PWM driven > > > > - RTC with super capacitor backup > > > > > > > > Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx> > > > > --- > > > > v4: > > > > - Moved the iomuxc node to the end of the file. > > > > - Moved the bus-width and non-removeable properties below > > > > the pinctrl-* properties in &usdhc3 node. > > > > - Moved the fsl,ext-reset-output below the pinctrl-* properties > > > > in &wdog1 node. > > > > v3: > > > > - Dropped pinctrl-names property from &usb_dwc3_1 node. > > > > v2: > > > > - Dropped unused property from pwm4 node. > > > > - Sorted all nodes and properties using dt-format tool from Frank. > > > > > > > > arch/arm64/boot/dts/freescale/Makefile | 1 + > > > > .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 423 ++++++++++++++++++ > > > > > > Suggest use https://github.com/lznuaa/dt-format > > > sort node. any issue, let me know. > > > > Thanks for the link :) would be nice to have this script to be part of > > the kernel. It depend on how much people like and use it. >> The script follows the rules in [1] I'm just used to have > > common properties like pinctrl-* in front of the device specific > > properties e.g. "enable-active-high". But this rule is not part of [1] > > so I can't blame the script. I just write it. Not 100% align order-of-properties-in-device-node yet. Some propertiy need special treated. Thank you provide the feedback. I push change, enable-active-high and gpio will after regulator*. Frank > > > > Regards, > > Marco > > > > [1] https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node > > Thank you for the review Frank & Marco. > I quickly went through the file again and found another few properties > that could be better ordered according to the kernel documentation [1]. > > > > > 2 files changed, 424 insertions(+) > > > > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts > > > > > > > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > > > > index 9d3df8b218a2..aa26a50b7bb4 100644 > > > > --- a/arch/arm64/boot/dts/freescale/Makefile > > > > +++ b/arch/arm64/boot/dts/freescale/Makefile > > > > @@ -171,6 +171,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb > > > > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts > > > > new file mode 100644 > > > > index 000000000000..9eb58e818dc7 > > > > --- /dev/null > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts > > > > @@ -0,0 +1,423 @@ > > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > +/* > > > > + * Copyright 2023 Y Soft > > > > + */ > > > > + > > > > +/dts-v1/; > > > > + > > > > +#include "imx8mp.dtsi" > > > > + > > > > +/ { > > > > + compatible = "ysoft,imx8mp-iota2-lumpy", "fsl,imx8mp"; > > > > + model = "Y Soft i.MX8MPlus IOTA2 Lumpy board"; > > > > + > > > > + beeper { > > > > + compatible = "pwm-beeper"; > > > > + pwms = <&pwm4 0 500000 0>; > > > > + }; > > > > + > > > > + chosen { > > > > + stdout-path = &uart2; > > > > + }; > > > > + > > > > + gpio_keys: gpio-keys { > > > > + compatible = "gpio-keys"; > > > > + pinctrl-0 = <&pinctrl_gpio_keys>; > > > > + pinctrl-names = "default"; > > > > + > > > > + button-reset { > > > > + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; > > > > + label = "Factory RESET"; > > > > + linux,code = <BTN_0>; > > > > + }; > > > > + }; > > > > + > > > > + reg_usb_host: regulator-usb-host { > > > > + compatible = "regulator-fixed"; > > > > + enable-active-high; > > > > + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; > > The enable-active-high and gpio should go bellow regulator-*. > > > > > + pinctrl-0 = <&pinctrl_usb_host_vbus>; > > > > + pinctrl-names = "default"; > > > > + regulator-max-microvolt = <5000000>; > > > > + regulator-min-microvolt = <5000000>; > > > > + regulator-name = "usb-host"; > > > > + }; > > > > + > > > > + memory@40000000 { > > > > + reg = <0x0 0x40000000 0 0x80000000>, > > > > + <0x1 0x00000000 0 0x80000000>; > > > > + device_type = "memory"; > > > > + }; > > > > +}; > > > > + > > > > +&A53_0 { > > > > + cpu-supply = <®_arm>; > > > > +}; > > > > + > > > > +&A53_1 { > > > > + cpu-supply = <®_arm>; > > > > +}; > > > > + > > > > +&A53_2 { > > > > + cpu-supply = <®_arm>; > > > > +}; > > > > + > > > > +&A53_3 { > > > > + cpu-supply = <®_arm>; > > > > +}; > > > > + > > > > +&eqos { > > > > + phy-handle = <ðphy0>; > > > > + phy-mode = "rgmii-id"; > > > > + pinctrl-0 = <&pinctrl_eqos>; > > > > + pinctrl-names = "default"; > > > > + status = "okay"; > > > > + > > > > + mdio { > > > > + compatible = "snps,dwmac-mdio"; > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + > > > > + ethphy0: ethernet-phy@0 { > > > > + reg = <0>; > > > > + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; > > > > + interrupt-parent = <&gpio3>; > > > > + micrel,led-mode = <0>; > > The micrel,* is a vendor specific property. It should go bellow the reset-*. > > > > > + pinctrl-0 = <&pinctrl_ethphy0>; > > > > + pinctrl-names = "default"; > > > > + reset-assert-us = <1000>; > > > > + reset-deassert-us = <1000>; > > > > + reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; > > > > + }; > > > > + }; > > > > +}; > > > > + > > > > +&fec { > > > > + fsl,magic-packet; > > > > + phy-handle = <ðphy1>; > > > > + phy-mode = "rgmii-id"; > > > > + pinctrl-0 = <&pinctrl_fec>; > > > > + pinctrl-names = "default"; > > > > + status = "okay"; > > > > + > > > > + mdio { > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + > > > > + ethphy1: ethernet-phy@0 { > > > > + reg = <0>; > > > > + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; > > > > + interrupt-parent = <&gpio3>; > > > > + micrel,led-mode = <0>; > > Same as above, micrel,* should go bellow common properties. > I will send a v5 with these fixed. > > Michal > > > > > + pinctrl-0 = <&pinctrl_ethphy1>; > > > > + pinctrl-names = "default"; > > > > + reset-assert-us = <1000>; > > > > + reset-deassert-us = <1000>; > > > > + reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; > > > > + }; > > > > + }; > > > > +}; > > > > +
