On Wed, 25 Sep 2024 14:49:01 +0200, Michal Vokáč wrote: > Hi, > this series adds support for a new member in our IOTA platform. > The board is based on the i.MX8MP SoC. It adds support for most > of the board functionality except USB Type-C port and some other > minor things. > > This series originally included the dt-binding for that Type-C > port controller but I finally removed it based on a good comment > from Krzysztof. I will post the Type-C binding including the driver > in a followup series. > > Michal > > Michal Vokáč (2): > dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board > arm64: dts: imx: Add imx8mp-iota2-lumpy board > > .../devicetree/bindings/arm/fsl.yaml | 1 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 423 ++++++++++++++++++ > 3 files changed, 425 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts > > -- > 2.43.0 > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y freescale/imx8mp-iota2-lumpy.dtb' for 20240925124903.1837869-1-michal.vokac@xxxxxxxxx: arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dtb: pcie-ep@33800000: reg: [[864026624, 4194304], [402653184, 134217728]] is too short from schema $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml# arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dtb: pcie-ep@33800000: reg-names: ['dbi', 'addr_space'] is too short from schema $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
