Hi, Qunqin,
The title should be "EDAC: Add EDAC driver for loongson memory controller"
On Wed, Sep 25, 2024 at 10:40 AM Zhao Qunqin <zhaoqunqin@xxxxxxxxxxx> wrote:
>
> Reports single bit errors (CE) only.
>
> Signed-off-by: Zhao Qunqin <zhaoqunqin@xxxxxxxxxxx>
> ---
> Changes in v5:
> - Drop the loongson_ prefix from all static functions.
> - Align function arguments on the opening brace.
> - Drop useless comments and useless wrapper. Drop side comments.
> - Reorder variable declarations.
>
> Changes in v4:
> - None
>
> Changes in v3:
> - Addressed review comments raised by Krzysztof and Huacai
>
> Changes in v2:
> - Addressed review comments raised by Krzysztof
>
> MAINTAINERS | 1 +
> arch/loongarch/Kconfig | 1 +
> drivers/edac/Kconfig | 8 ++
> drivers/edac/Makefile | 1 +
> drivers/edac/loongson_edac.c | 168 +++++++++++++++++++++++++++++++++++
> 5 files changed, 179 insertions(+)
> create mode 100644 drivers/edac/loongson_edac.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6cc8cfc8f..5b4526638 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13242,6 +13242,7 @@ M: Zhao Qunqin <zhaoqunqin@xxxxxxxxxxx>
> L: linux-edac@xxxxxxxxxxxxxxx
> S: Maintained
> F: Documentation/devicetree/bindings/edac/loongson,ls3a5000-mc-edac.yaml
> +F: drivers/edac/loongson_edac.c
>
> LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
> M: Sathya Prakash <sathya.prakash@xxxxxxxxxxxx>
> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
> index 70f169210..9c135f1a2 100644
> --- a/arch/loongarch/Kconfig
> +++ b/arch/loongarch/Kconfig
> @@ -181,6 +181,7 @@ config LOONGARCH
> select PCI_MSI_ARCH_FALLBACKS
> select PCI_QUIRKS
> select PERF_USE_VMALLOC
> + select EDAC_SUPPORT
> select RTC_LIB
> select SPARSE_IRQ
> select SYSCTL_ARCH_UNALIGN_ALLOW
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 81af6c344..719bb6ca7 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -564,5 +564,13 @@ config EDAC_VERSAL
> Support injecting both correctable and uncorrectable errors
> for debugging purposes.
>
> +config EDAC_LOONGSON3
> + tristate "Loongson-3 Memory Controller"
> + depends on LOONGARCH || COMPILE_TEST
> + help
> + Support for error detection and correction on the Loongson-3
> + family memory controller. This driver reports single bit
> + errors (CE) only. Loongson-3A5000/3C5000/3D5000/3C5000L/3A6000/3C6000
> + are compatible.
>
> endif # EDAC
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index faf310eec..e72ca1be4 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -88,3 +88,4 @@ obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o
> obj-$(CONFIG_EDAC_NPCM) += npcm_edac.o
> obj-$(CONFIG_EDAC_ZYNQMP) += zynqmp_edac.o
> obj-$(CONFIG_EDAC_VERSAL) += versal_edac.o
> +obj-$(CONFIG_EDAC_LOONGSON3) += loongson_edac.o
Change the Kconfig name to CONFIG_EDAC_LOONGSON, or change the file
name to loongson3_edac.c may be a little better.
Huacai
> diff --git a/drivers/edac/loongson_edac.c b/drivers/edac/loongson_edac.c
> new file mode 100644
> index 000000000..2721dfba5
> --- /dev/null
> +++ b/drivers/edac/loongson_edac.c
> @@ -0,0 +1,168 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2024 Loongson Technology Corporation Limited.
> + */
> +
> +#include <linux/edac.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +
> +#include "edac_module.h"
> +
> +enum ecc_index {
> + ECC_SET = 0,
> + ECC_RESERVED,
> + ECC_COUNT,
> + ECC_CS_COUNT,
> + ECC_CODE,
> + ECC_ADDR,
> + ECC_DATA0,
> + ECC_DATA1,
> + ECC_DATA2,
> + ECC_DATA3,
> +};
> +
> +struct loongson_edac_pvt {
> + u64 *ecc_base;
> + int last_ce_count;
> +};
> +
> +static int read_ecc(struct mem_ctl_info *mci)
> +{
> + struct loongson_edac_pvt *pvt = mci->pvt_info;
> + u64 ecc;
> + int cs;
> +
> + if (!pvt->ecc_base)
> + return pvt->last_ce_count;
> +
> + ecc = pvt->ecc_base[ECC_CS_COUNT];
> + /* cs0 -- cs3 */
> + cs = ecc & 0xff;
> + cs += (ecc >> 8) & 0xff;
> + cs += (ecc >> 16) & 0xff;
> + cs += (ecc >> 24) & 0xff;
> +
> + return cs;
> +}
> +
> +static void edac_check(struct mem_ctl_info *mci)
> +{
> + struct loongson_edac_pvt *pvt = mci->pvt_info;
> + int new, add;
> +
> + new = read_ecc(mci);
> + add = new - pvt->last_ce_count;
> + pvt->last_ce_count = new;
> + if (add <= 0)
> + return;
> +
> + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add,
> + 0, 0, 0, 0, 0, -1, "error", "");
> + edac_mc_printk(mci, KERN_INFO, "add: %d", add);
> +}
> +
> +static int get_dimm_config(struct mem_ctl_info *mci)
> +{
> + struct dimm_info *dimm;
> + u32 size, npages;
> +
> + /* size not used */
> + size = -1;
> + npages = MiB_TO_PAGES(size);
> +
> + dimm = edac_get_dimm(mci, 0, 0, 0);
> + dimm->nr_pages = npages;
> + snprintf(dimm->label, sizeof(dimm->label),
> + "MC#%uChannel#%u_DIMM#%u", mci->mc_idx, 0, 0);
> + dimm->grain = 8;
> +
> + return 0;
> +}
> +
> +static void pvt_init(struct mem_ctl_info *mci, u64 *vbase)
> +{
> + struct loongson_edac_pvt *pvt = mci->pvt_info;
> +
> + pvt->ecc_base = vbase;
> + pvt->last_ce_count = read_ecc(mci);
> +}
> +
> +static int edac_probe(struct platform_device *pdev)
> +{
> + struct edac_mc_layer layers[2];
> + struct loongson_edac_pvt *pvt;
> + struct mem_ctl_info *mci;
> + u64 *vbase;
> + int ret;
> +
> + vbase = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(vbase))
> + return PTR_ERR(vbase);
> +
> + /* allocate a new MC control structure */
> + layers[0].type = EDAC_MC_LAYER_CHANNEL;
> + layers[0].size = 1;
> + layers[0].is_virt_csrow = false;
> + layers[1].type = EDAC_MC_LAYER_SLOT;
> + layers[1].size = 1;
> + layers[1].is_virt_csrow = true;
> + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
> + if (mci == NULL)
> + return -ENOMEM;
> +
> + mci->mc_idx = edac_device_alloc_index();
> + mci->mtype_cap = MEM_FLAG_RDDR4;
> + mci->edac_ctl_cap = EDAC_FLAG_NONE;
> + mci->edac_cap = EDAC_FLAG_NONE;
> + mci->mod_name = "loongson_edac.c";
> + mci->ctl_name = "loongson_edac_ctl";
> + mci->dev_name = "loongson_edac_dev";
> + mci->ctl_page_to_phys = NULL;
> + mci->pdev = &pdev->dev;
> + mci->error_desc.grain = 8;
> + /* Set the function pointer to an actual operation function */
> + mci->edac_check = edac_check;
> +
> + pvt_init(mci, vbase);
> + get_dimm_config(mci);
> +
> + ret = edac_mc_add_mc(mci);
> + if (ret) {
> + edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
> + edac_mc_free(mci);
> + return ret;
> + }
> + edac_op_state = EDAC_OPSTATE_POLL;
> +
> + return 0;
> +}
> +
> +static void edac_remove(struct platform_device *pdev)
> +{
> + struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev);
> +
> + if (mci)
> + edac_mc_free(mci);
> +}
> +
> +static const struct of_device_id loongson_edac_of_match[] = {
> + { .compatible = "loongson,ls3a5000-mc-edac", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, loongson_edac_of_match);
> +
> +static struct platform_driver loongson_edac_driver = {
> + .probe = edac_probe,
> + .remove = edac_remove,
> + .driver = {
> + .name = "loongson-mc-edac",
> + .of_match_table = loongson_edac_of_match,
> + },
> +};
> +module_platform_driver(loongson_edac_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Zhao Qunqin <zhaoqunqin@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("EDAC driver for loongson memory controller");
> --
> 2.43.0
>
>
