Change the i2c mux channel to match the correct fan board location.
Signed-off-by: Yang Chen <yangchen.openbmc@xxxxxxxxx>
---
.../aspeed/aspeed-bmc-facebook-minerva.dts | 31 ++++++++++---------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index 38eb42aaa98b..c915db28a806 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -213,10 +213,11 @@ i2c-mux@77 {
#size-cells = <0>;
i2c-mux-idle-disconnect;
- imux16: i2c@0 {
+ // FCB 1
+ imux16: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0>;
+ reg = <1>;
eeprom@50 {
compatible = "atmel,24c128";
@@ -259,11 +260,11 @@ temperature-sensor@4b {
reg = <0x4b>;
};
};
-
- imux17: i2c@1 {
+ // FCB 2
+ imux17: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <1>;
+ reg = <0>;
eeprom@50 {
compatible = "atmel,24c128";
@@ -306,11 +307,11 @@ temperature-sensor@4b {
reg = <0x4b>;
};
};
-
- imux18: i2c@2 {
+ // FCB 3
+ imux18: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <2>;
+ reg = <3>;
eeprom@50 {
compatible = "atmel,24c128";
@@ -353,11 +354,11 @@ temperature-sensor@4b {
reg = <0x4b>;
};
};
-
- imux19: i2c@3 {
+ // FCB 4
+ imux19: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <3>;
+ reg = <2>;
eeprom@50 {
compatible = "atmel,24c128";
@@ -400,8 +401,8 @@ temperature-sensor@4b {
reg = <0x4b>;
};
};
-
- imux20: i2c@5 {
+ // FCB 5
+ imux20: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
@@ -446,8 +447,8 @@ temperature-sensor@4b {
reg = <0x4b>;
};
};
-
- imux21: i2c@4 {
+ // FCB 6
+ imux21: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
--
2.34.1
