Re: [PATCH v4 2/2] arm64: dts: imx: Add imx8mp-iota2-lumpy board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24-09-24, Michal Vokáč wrote:
> The IOTA2 Lumpy board is based on the i.MX8MPlus EVK.
> 
> Basic features are:
> - 4GB LPDDR4
> - 64GB eMMC
> - 2x 1GB Ethernet
> - USB 3.0 Type-C dual role port, without power delivery
> - USB 3.0 Type-A host port
> - RGB LED - PWM driven
> - speaker - PWM driven
> - RTC with super capacitor backup
> 
> Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>

LGTM, feel free to add my:

Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>

> ---
> v4:
> - Moved the iomuxc node to the end of the file.
> - Moved the bus-width and non-removeable properties below
>   the pinctrl-* properties in &usdhc3 node.
> - Moved the fsl,ext-reset-output below the pinctrl-* properties
>   in &wdog1 node.
> v3:
> - Dropped pinctrl-names property from &usb_dwc3_1 node.
> v2:
> - Dropped unused property from pwm4 node.
> - Sorted all nodes and properties using dt-format tool from Frank.
> 
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 423 ++++++++++++++++++
>  2 files changed, 424 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 9d3df8b218a2..aa26a50b7bb4 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -171,6 +171,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
> new file mode 100644
> index 000000000000..9eb58e818dc7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
> @@ -0,0 +1,423 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2023 Y Soft
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mp.dtsi"
> +
> +/ {
> +	compatible = "ysoft,imx8mp-iota2-lumpy", "fsl,imx8mp";
> +	model = "Y Soft i.MX8MPlus IOTA2 Lumpy board";
> +
> +	beeper {
> +		compatible = "pwm-beeper";
> +		pwms = <&pwm4 0 500000 0>;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	gpio_keys: gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-0 = <&pinctrl_gpio_keys>;
> +		pinctrl-names = "default";
> +
> +		button-reset {
> +			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
> +			label = "Factory RESET";
> +			linux,code = <BTN_0>;
> +		};
> +	};
> +
> +	reg_usb_host: regulator-usb-host {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&pinctrl_usb_host_vbus>;
> +		pinctrl-names = "default";
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-name = "usb-host";
> +	};
> +
> +	memory@40000000 {
> +		reg = <0x0 0x40000000 0 0x80000000>,
> +		      <0x1 0x00000000 0 0x80000000>;
> +		device_type = "memory";
> +	};
> +};
> +
> +&A53_0 {
> +	cpu-supply = <&reg_arm>;
> +};
> +
> +&A53_1 {
> +	cpu-supply = <&reg_arm>;
> +};
> +
> +&A53_2 {
> +	cpu-supply = <&reg_arm>;
> +};
> +
> +&A53_3 {
> +	cpu-supply = <&reg_arm>;
> +};
> +
> +&eqos {
> +	phy-handle = <&ethphy0>;
> +	phy-mode = "rgmii-id";
> +	pinctrl-0 = <&pinctrl_eqos>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	mdio {
> +		compatible = "snps,dwmac-mdio";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy0: ethernet-phy@0 {
> +			reg = <0>;
> +			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> +			interrupt-parent = <&gpio3>;
> +			micrel,led-mode = <0>;
> +			pinctrl-0 = <&pinctrl_ethphy0>;
> +			pinctrl-names = "default";
> +			reset-assert-us = <1000>;
> +			reset-deassert-us = <1000>;
> +			reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&fec {
> +	fsl,magic-packet;
> +	phy-handle = <&ethphy1>;
> +	phy-mode = "rgmii-id";
> +	pinctrl-0 = <&pinctrl_fec>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy1: ethernet-phy@0 {
> +			reg = <0>;
> +			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> +			interrupt-parent = <&gpio3>;
> +			micrel,led-mode = <0>;
> +			pinctrl-0 = <&pinctrl_ethphy1>;
> +			pinctrl-names = "default";
> +			reset-assert-us = <1000>;
> +			reset-deassert-us = <1000>;
> +			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	pmic@25 {
> +		compatible = "nxp,pca9450c";
> +		reg = <0x25>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-parent = <&gpio1>;
> +		pinctrl-0 = <&pinctrl_pmic>;
> +		pinctrl-names = "default";
> +
> +		regulators {
> +			BUCK1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-min-microvolt = <720000>;
> +				regulator-name = "BUCK1";
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			reg_arm: BUCK2 {
> +				nxp,dvs-run-voltage = <950000>;
> +				nxp,dvs-standby-voltage = <850000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1025000>;
> +				regulator-min-microvolt = <720000>;
> +				regulator-name = "BUCK2";
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			BUCK4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <3600000>;
> +				regulator-min-microvolt = <3000000>;
> +				regulator-name = "BUCK4";
> +			};
> +
> +			BUCK5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-min-microvolt = <1650000>;
> +				regulator-name = "BUCK5";
> +			};
> +
> +			BUCK6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1155000>;
> +				regulator-min-microvolt = <1045000>;
> +				regulator-name = "BUCK6";
> +			};
> +
> +			LDO1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-min-microvolt = <1650000>;
> +				regulator-name = "LDO1";
> +			};
> +
> +			LDO3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1890000>;
> +				regulator-min-microvolt = <1710000>;
> +				regulator-name = "LDO3";
> +			};
> +
> +			LDO4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <950000>;
> +				regulator-min-microvolt = <850000>;
> +				regulator-name = "LDO4";
> +			};
> +
> +			LDO5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-name = "LDO5";
> +			};
> +		};
> +	};
> +};
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	rtc: rtc@68 {
> +		compatible = "dallas,ds1341";
> +		reg = <0x68>;
> +	};
> +};
> +
> +&pwm4 {
> +	pinctrl-0 = <&pinctrl_pwm4>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&usb3_1 {
> +	status = "okay";
> +};
> +
> +&usb3_phy1 {
> +	vbus-supply = <&reg_usb_host>;
> +	status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
> +	assigned-clock-rates = <400000000>;
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	bus-width = <8>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&wdog1 {
> +	pinctrl-0 = <&pinctrl_wdog>;
> +	pinctrl-names = "default";
> +	fsl,ext-reset-output;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_eqos: eqosgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2
> +			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x2
> +			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
> +			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
> +			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
> +			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
> +			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
> +			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
> +			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
> +			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
> +			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
> +			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
> +			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
> +			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
> +		>;
> +	};
> +
> +	pinctrl_ethphy0: ethphy0grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x10
> +			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22		0x10
> +		>;
> +	};
> +
> +	pinctrl_ethphy1: ethphy1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x10
> +			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x10
> +		>;
> +	};
> +
> +	pinctrl_fec: fecgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
> +			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
> +			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
> +			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
> +			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
> +			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
> +			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
> +			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
> +			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x16
> +			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x16
> +			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x16
> +			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x16
> +			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
> +			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x16
> +		>;
> +	};
> +
> +	pinctrl_gpio_keys: gpiokeysgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x80
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
> +			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
> +			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_pmic: pmicgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c0
> +		>;
> +	};
> +
> +	pinctrl_pwm4: pwm4grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT	0x102
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x0
> +			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x0
> +		>;
> +	};
> +
> +	pinctrl_usb_host_vbus: usb1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x0
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
> +			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
> +			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
> +			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
> +			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
> +			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
> +			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
> +			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
> +			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
> +			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
> +			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
> +			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
> +			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
> +			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
> +			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
> +			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
> +			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
> +			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
> +			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
> +			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
> +			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
> +			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
> +			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
> +			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
> +			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
> +			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
> +			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
> +			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
> +			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
> +			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
> +			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
> +		>;
> +	};
> +
> +	pinctrl_wdog: wdoggrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
> +		>;
> +	};
> +};
> -- 
> 2.43.0
> 
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux