The ethernet-phy node in mt8395-genio-1200-evk.dts was triggering a
dtbs_check error. The error message was:
eth-phy0@1: $nodename:0: 'eth-phy0@1' does not match
'^ethernet-phy(@[a-f0-9]+)?$'
Fix this issue by replacing 'eth-phy' node to generic 'ethernet-phy'.
Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 1ef6262b65c9..b4b48eb93f3c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -187,7 +187,7 @@ mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
- eth_phy0: eth-phy0@1 {
+ eth_phy0: ethernet-phy@1 {
compatible = "ethernet-phy-id001c.c916";
reg = <0x1>;
};
--
2.45.2
