[PATCH v2 8/9] LoongArch: dts: Add I2S support to Loongson-2K1000

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The module is supported, adding it.

Not all Loongson-2K1000 boards have an i2s interface, here is an example
of enabling it:

sound {
	compatible = "loongson,ls-audio-card";
	model = "Loongson-ASoC";
	mclk-fs = <512>;

	cpu {
		sound-dai = <&i2s>;
	};

	codec {
		sound-dai = <&uda1342>;
	};
};

&apbdma2 {
	status = "okay";
};

&apbdma3 {
	status = "okay";
};

&i2c3 {
	status = "okay";

	pinctrl-0 = <&i2c1_pins_default>;
	pinctrl-names = "default";

	#address-cells = <1>;
	#size-cells = <0>;

	uda1342: codec@1a {
		compatible = "nxp,uda1342";
		reg = <0x1a>;
		#sound-dai-cells = <0>;
	};
};

&i2s {
	status = "okay";

	pinctrl-0 = <&hda_pins_default>;
	pinctrl-names = "default";
};

Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
 arch/loongarch/boot/dts/loongson-2k1000.dtsi | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
index 92180140eb56..8dff2aa52417 100644
--- a/arch/loongarch/boot/dts/loongson-2k1000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -266,7 +266,7 @@ dma-controller@1fe00c10 {
 			status = "disabled";
 		};
 
-		dma-controller@1fe00c20 {
+		apbdma2: dma-controller@1fe00c20 {
 			compatible = "loongson,ls2k1000-apbdma";
 			reg = <0x0 0x1fe00c20 0x0 0x8>;
 			interrupt-parent = <&liointc1>;
@@ -276,7 +276,7 @@ dma-controller@1fe00c20 {
 			status = "disabled";
 		};
 
-		dma-controller@1fe00c30 {
+		apbdma3: dma-controller@1fe00c30 {
 			compatible = "loongson,ls2k1000-apbdma";
 			reg = <0x0 0x1fe00c30 0x0 0x8>;
 			interrupt-parent = <&liointc1>;
@@ -352,6 +352,19 @@ rtc0: rtc@1fe27800 {
 			status = "disabled";
 		};
 
+		i2s: i2s@1fe2d000 {
+			compatible = "loongson,ls2k1000-i2s";
+			reg = <0 0x1fe2d000 0 0x14>,
+			      <0 0x1fe00438 0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			dmas = <&apbdma2 0>, <&apbdma3 0>;
+			dma-names = "tx", "rx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
 		spi0: spi@1fff0220 {
 			compatible = "loongson,ls2k1000-spi";
 			reg = <0x0 0x1fff0220 0x0 0x10>;
-- 
2.43.5





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux