From: Junhui Liu <liujh2818@xxxxxxxxxxx>
Add support for the resets on Canaan Kendryte K230 SoC.
Signed-off-by: Junhui Liu <liujh2818@xxxxxxxxxxx>
---
drivers/reset/Kconfig | 8 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-k230.c | 321 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 330 insertions(+)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 5484a65f66b95374e25bac31f539a2dd92ae007e..716c676e9b934dd3d2b1ee28f2c43ef38daf7dba 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -133,6 +133,14 @@ config RESET_K210
Say Y if you want to control reset signals provided by this
controller.
+config RESET_K230
+ bool "Reset controller driver for Canaan Kendryte K230 SoC"
+ depends on (ARCH_CANAAN || COMPILE_TEST) && OF
+ help
+ Support for the Canaan Kendryte K230 RISC-V SoC reset controller.
+ Say Y if you want to control reset signals provided by this
+ controller.
+
config RESET_LANTIQ
bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
default SOC_TYPE_XWAY
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 4411a2a124d7de29808fcf36d0829393fc79af72..f02c35607ba88947e868d33ead70e9ec91a85636 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_IMX8MP_AUDIOMIX) += reset-imx8mp-audiomix.o
obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
obj-$(CONFIG_RESET_K210) += reset-k210.o
+obj-$(CONFIG_RESET_K230) += reset-k230.o
obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
diff --git a/drivers/reset/reset-k230.c b/drivers/reset/reset-k230.c
new file mode 100644
index 0000000000000000000000000000000000000000..9c693e1cee35dd725bebb6916002f846e8b4003b
--- /dev/null
+++ b/drivers/reset/reset-k230.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016-2017 Linaro Ltd.
+ * Copyright (C) 2022-2024 Canaan Bright Sight Co., Ltd
+ * Copyright (C) 2024 Junhui Liu <liujh2818@xxxxxxxxxxx>
+ */
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <dt-bindings/reset/canaan,k230-rst.h>
+
+/**
+ * enum k230_rst_type - K230 reset types
+ * @RST_TYPE_CPU0: Reset type for CPU0
+ * Automatically clears, has write enable and done bit, active high
+ * @RST_TYPE_CPU1: Reset type for CPU1
+ * Manually clears, has write enable and done bit, active high
+ * @RST_TYPE_FLUSH: Reset type for CPU L2 cache flush
+ * Automatically clears, has write enable, no done bit, active high
+ * @RST_TYPE_HW_DONE: Reset type for hardware auto clear
+ * Automatically clears, no write enable, has done bit, active high
+ * @RST_TYPE_SW_DONE: Reset type for software manual clear
+ * Manually clears, no write enable and done bit,
+ * active high if ID is RST_SPI2AXI, otherwise active low
+ */
+enum k230_rst_type {
+ RST_TYPE_CPU0 = 0,
+ RST_TYPE_CPU1,
+ RST_TYPE_FLUSH,
+ RST_TYPE_HW_DONE,
+ RST_TYPE_SW_DONE,
+};
+
+struct k230_rst_map {
+ u32 offset;
+ enum k230_rst_type type;
+ u32 done;
+ u32 reset;
+};
+
+struct k230_rst {
+ struct reset_controller_dev rcdev;
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+};
+
+static const struct k230_rst_map k230_resets[] = {
+ [RST_CPU0] = { 0x4, RST_TYPE_CPU0, BIT(12), BIT(0) },
+ [RST_CPU1] = { 0xc, RST_TYPE_CPU1, BIT(12), BIT(0) },
+ [RST_CPU0_FLUSH] = { 0x4, RST_TYPE_FLUSH, 0, BIT(4) },
+ [RST_CPU1_FLUSH] = { 0xc, RST_TYPE_FLUSH, 0, BIT(4) },
+ [RST_AI] = { 0x14, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_VPU] = { 0x1c, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_HS] = { 0x2c, RST_TYPE_HW_DONE, BIT(4), BIT(0) },
+ [RST_HS_AHB] = { 0x2c, RST_TYPE_HW_DONE, BIT(5), BIT(1) },
+ [RST_SDIO0] = { 0x34, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_SDIO1] = { 0x34, RST_TYPE_HW_DONE, BIT(29), BIT(1) },
+ [RST_SDIO_AXI] = { 0x34, RST_TYPE_HW_DONE, BIT(30), BIT(2) },
+ [RST_USB0] = { 0x3c, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_USB1] = { 0x3c, RST_TYPE_HW_DONE, BIT(29), BIT(1) },
+ [RST_USB0_AHB] = { 0x3c, RST_TYPE_HW_DONE, BIT(30), BIT(0) },
+ [RST_USB1_AHB] = { 0x3c, RST_TYPE_HW_DONE, BIT(31), BIT(1) },
+ [RST_SPI0] = { 0x44, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_SPI1] = { 0x44, RST_TYPE_HW_DONE, BIT(29), BIT(1) },
+ [RST_SPI2] = { 0x44, RST_TYPE_HW_DONE, BIT(30), BIT(2) },
+ [RST_SEC] = { 0x4c, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_PDMA] = { 0x54, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_SDMA] = { 0x54, RST_TYPE_HW_DONE, BIT(29), BIT(1) },
+ [RST_DECOMPRESS] = { 0x5c, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_SRAM] = { 0x64, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_SHRM_AXIM] = { 0x64, RST_TYPE_HW_DONE, BIT(30), BIT(2) },
+ [RST_SHRM_AXIS] = { 0x64, RST_TYPE_HW_DONE, BIT(31), BIT(3) },
+ [RST_NONAI2D] = { 0x6c, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_MCTL] = { 0x74, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_ISP] = { 0x80, RST_TYPE_HW_DONE, BIT(29), BIT(6) },
+ [RST_ISP_DW] = { 0x80, RST_TYPE_HW_DONE, BIT(28), BIT(5) },
+ [RST_DPU] = { 0x88, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_DISP] = { 0x90, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_GPU] = { 0x98, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_AUDIO] = { 0xa4, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_TIMER0] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(0) },
+ [RST_TIMER1] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(1) },
+ [RST_TIMER2] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(2) },
+ [RST_TIMER3] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(3) },
+ [RST_TIMER4] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(4) },
+ [RST_TIMER5] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(5) },
+ [RST_TIMER_APB] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(6) },
+ [RST_HDI] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(7) },
+ [RST_WDT0] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(12) },
+ [RST_WDT1] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(13) },
+ [RST_WDT0_APB] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(14) },
+ [RST_WDT1_APB] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(15) },
+ [RST_TS_APB] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(16) },
+ [RST_MAILBOX] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(17) },
+ [RST_STC] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(18) },
+ [RST_PMU] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(19) },
+ [RST_LS_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(0) },
+ [RST_UART0] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(1) },
+ [RST_UART1] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(2) },
+ [RST_UART2] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(3) },
+ [RST_UART3] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(4) },
+ [RST_UART4] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(5) },
+ [RST_I2C0] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(6) },
+ [RST_I2C1] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(7) },
+ [RST_I2C2] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(8) },
+ [RST_I2C3] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(9) },
+ [RST_I2C4] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(10) },
+ [RST_JAMLINK0_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(11) },
+ [RST_JAMLINK1_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(12) },
+ [RST_JAMLINK2_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(13) },
+ [RST_JAMLINK3_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(14) },
+ [RST_CODEC_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(17) },
+ [RST_GPIO_DB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(18) },
+ [RST_GPIO_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(19) },
+ [RST_ADC] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(20) },
+ [RST_ADC_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(21) },
+ [RST_PWM_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(22) },
+ [RST_SHRM_APB] = { 0x64, RST_TYPE_SW_DONE, 0, BIT(1) },
+ [RST_CSI0] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(0) },
+ [RST_CSI1] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(1) },
+ [RST_CSI2] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(2) },
+ [RST_CSI_DPHY] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(3) },
+ [RST_ISP_AHB] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(4) },
+ [RST_M0] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(7) },
+ [RST_M1] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(8) },
+ [RST_M2] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(9) },
+ [RST_SPI2AXI] = { 0xa8, RST_TYPE_SW_DONE, 0, BIT(0) }
+};
+
+#define to_k230_rst(p) container_of((p), struct k230_rst, rcdev)
+
+static void k230_rst_clear_done(struct k230_rst *rstc, unsigned long id,
+ bool write_en)
+{
+ const struct k230_rst_map *rmap = &k230_resets[id];
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&rstc->lock, flags);
+
+ reg = readl(rstc->base + rmap->offset);
+
+ /* write 1 to clear */
+ reg |= rmap->done;
+ if (write_en)
+ reg |= rmap->done << 16;
+
+ writel(reg, rstc->base + rmap->offset);
+
+ spin_unlock_irqrestore(&rstc->lock, flags);
+}
+
+static int k230_rst_wait_and_clear_done(struct k230_rst *rstc, unsigned long id,
+ bool write_en)
+{
+ const struct k230_rst_map *rmap = &k230_resets[id];
+ u32 reg;
+ int ret;
+
+ ret = readl_poll_timeout(rstc->base + rmap->offset, reg,
+ reg & rmap->done, 10, 1000);
+ if (ret) {
+ dev_err(rstc->dev, "Wait for reset done timeout\n");
+ return ret;
+ }
+
+ k230_rst_clear_done(rstc, id, write_en);
+
+ return 0;
+}
+
+static void k230_rst_update(struct k230_rst *rstc, unsigned long id,
+ bool assert, bool write_en, bool active_low)
+{
+ const struct k230_rst_map *rmap = &k230_resets[id];
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&rstc->lock, flags);
+
+ reg = readl(rstc->base + rmap->offset);
+
+ if (assert ^ active_low)
+ reg |= rmap->reset;
+ else
+ reg &= ~rmap->reset;
+
+ if (write_en)
+ reg |= rmap->reset << 16;
+
+ writel(reg, rstc->base + rmap->offset);
+
+ spin_unlock_irqrestore(&rstc->lock, flags);
+}
+
+static int k230_rst_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct k230_rst *rstc = to_k230_rst(rcdev);
+ const struct k230_rst_map *rmap = &k230_resets[id];
+ int ret;
+
+ switch (rmap->type) {
+ case RST_TYPE_CPU0:
+ k230_rst_clear_done(rstc, id, true);
+ k230_rst_update(rstc, id, true, true, false);
+ ret = k230_rst_wait_and_clear_done(rstc, id, true);
+ break;
+ case RST_TYPE_CPU1:
+ case RST_TYPE_FLUSH:
+ k230_rst_update(rstc, id, true, true, false);
+ break;
+ case RST_TYPE_HW_DONE:
+ k230_rst_clear_done(rstc, id, false);
+ k230_rst_update(rstc, id, true, false, false);
+ ret = k230_rst_wait_and_clear_done(rstc, id, false);
+ break;
+ case RST_TYPE_SW_DONE:
+ k230_rst_update(rstc, id, true, false,
+ id == RST_SPI2AXI ? false : true);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int k230_rst_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct k230_rst *rstc = to_k230_rst(rcdev);
+ int ret;
+
+ switch (k230_resets[id].type) {
+ case RST_TYPE_CPU0:
+ break;
+ case RST_TYPE_CPU1:
+ k230_rst_update(rstc, id, false, true, false);
+ ret = k230_rst_wait_and_clear_done(rstc, id, true);
+ break;
+ case RST_TYPE_FLUSH:
+ case RST_TYPE_HW_DONE:
+ break;
+ case RST_TYPE_SW_DONE:
+ k230_rst_update(rstc, id, false, false,
+ id == RST_SPI2AXI ? false : true);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int k230_rst_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ int ret;
+
+ ret = k230_rst_assert(rcdev, id);
+ if (ret)
+ return ret;
+
+ udelay(10);
+
+ return k230_rst_deassert(rcdev, id);
+}
+
+static const struct reset_control_ops k230_rst_ops = {
+ .reset = k230_rst_reset,
+ .assert = k230_rst_assert,
+ .deassert = k230_rst_deassert,
+};
+
+static int k230_rst_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct k230_rst *rstc;
+
+ rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
+ if (!rstc)
+ return -ENOMEM;
+
+ rstc->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(rstc->base))
+ return PTR_ERR(rstc->base);
+
+ spin_lock_init(&rstc->lock);
+
+ rstc->dev = dev;
+ rstc->rcdev.owner = THIS_MODULE;
+ rstc->rcdev.ops = &k230_rst_ops;
+ rstc->rcdev.nr_resets = ARRAY_SIZE(k230_resets);
+ rstc->rcdev.of_node = dev->of_node;
+
+ return devm_reset_controller_register(dev, &rstc->rcdev);
+}
+
+static const struct of_device_id k230_rst_match[] = {
+ { .compatible = "canaan,k230-rst", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, k230_rst_match);
+
+static struct platform_driver k230_rst_driver = {
+ .probe = k230_rst_probe,
+ .driver = {
+ .name = "k230-rst",
+ .of_match_table = k230_rst_match,
+ }
+};
+module_platform_driver(k230_rst_driver);
+
+MODULE_AUTHOR("Junhui Liu <liujh2818@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Canaan K230 reset driver");
+MODULE_LICENSE("GPL v2");
--
2.46.1
