Add PAC1934 support in order to monitor the board power consumption.
Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
---
.../arm/boot/dts/microchip/at91-sam9x60ek.dts | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index 3b38707d736e..6cf699d9b540 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -260,6 +260,37 @@ i2c6: i2c@600 {
i2c-digital-filter-width-ns = <35>;
status = "okay";
+ power-monitor@17 {
+ compatible = "microchip,pac1934";
+ reg = <0x17>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@1 {
+ reg = <0x1>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDDIOM";
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDDCORE";
+ };
+
+ channel@3 {
+ reg = <0x3>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDD3V3_MPU";
+ };
+
+ channel@4 {
+ reg = <0x4>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDD3V3";
+ };
+ };
+
gpio_exp: mcp23008@20 {
compatible = "microchip,mcp23008";
reg = <0x20>;
--
2.46.1
