Configure GPU regulator supplies and enable GPU for GENIO 700 EVK.
The GPU in MT8390 & MT8188 has two power inputs: "DVDD_GPU" and
"DVDD_SRAM_GPU". In Genio 700 EVK, DVDD_GPU is supplied by
mt6359_vproc2_buck_reg, and DVDD_SRAM_GPU is supplied by
mt6359_vsram_others_ldo_reg.
According to section 5.2 "Recommended Operating Conditions" in
MT8390 IoT Application Processor Datasheet v1.9, The recommended
operating voltage ranges are:
- DVDD_GPU: min 0.55V, max 0.86V, typical 0.75V
- DVDD_SRAM_GPU: min 0.71V, max 0.92V, typical 0.85V
In this commit, we set DVDD_SRAM_GPU to typical 0.85V. It is possbile
to couple it to the DVDD_GPU in future patches.
Signed-off-by: Pablo Sun <pablo.sun@xxxxxxxxxxxx>
---
.../dts/mediatek/mt8390-genio-700-evk.dts | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
index 1474bef7e754..a1d6f4cd4e5f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
@@ -190,6 +190,11 @@ usb_p2_vbus: regulator-10 {
};
};
+&gpu {
+ mali-supply = <&mt6359_vproc2_buck_reg>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@@ -253,6 +258,14 @@ &i2c6 {
status = "okay";
};
+&mfg0 {
+ domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+ domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
&mmc0 {
status = "okay";
pinctrl-names = "default", "state_uhs";
@@ -314,6 +327,11 @@ &mt6359_vpa_buck_reg {
regulator-max-microvolt = <3100000>;
};
+&mt6359_vproc2_buck_reg {
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <860000>;
+};
+
&mt6359_vpu_buck_reg {
regulator-always-on;
};
@@ -326,6 +344,12 @@ &mt6359_vsim1_ldo_reg {
regulator-enable-ramp-delay = <480>;
};
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+};
+
&mt6359_vufs_ldo_reg {
regulator-always-on;
};
--
2.45.2
