Hi, this series adds support for a new member in our IOTA platform. The board is based on the i.MX8MP SoC. The first two patches add support for most of the board functionality except USB Type-C port and some other minor things. [PATCH 3] adds new device tree binding for a Diodes Incorporated PI5USB30213A Type-C Controller and [PATCH 4] enables that port on the IOTA2 Lumpy board. We also wrote a driver for that Type-C port controller. I would like to get that driver upstream as well but I expect it will take much more iterations and effort to get it into mainline-ready shape so I intentionally excluded it from this series. AFAIK it should not be a problem to accept a device tree binding for a HW that does not have a driver in the kernel yet. Michal Vokáč (2): dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board arm64: dts: imx: Add imx8mp-iota2-lumpy board Petr Benes (2): dt-bindings: usb: Add Diodes Incorporated PI5USB30213A Type-C Controller arm64: dts: imx8mp-iota2: Enable the USB Type-C port .../devicetree/bindings/arm/fsl.yaml | 1 + .../bindings/usb/diodes,pi5usb30213a.yaml | 88 +++ arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 518 ++++++++++++++++++ 4 files changed, 608 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/diodes,pi5usb30213a.yaml create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts -- 2.43.0