On Thu, Mar 19, 2015 at 07:57:29AM +0000, kongxinwei wrote:
> This adds documentation of device tree bindings for the
> thermal sensor controller of hi6220 SoC.
Please place the patches adding binding docs _before_ any patcheds
introducing code or dts files using them.
>
> Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
> Signed-off-by: kongxinwei <kong.kongxinwei@xxxxxxxxxxxxx>
> ---
> .../bindings/thermal/hisilicon-thermal.txt | 51 ++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
>
> diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
> new file mode 100644
> index 0000000..b75c48e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
> @@ -0,0 +1,51 @@
> +* Hisilicon Thermal
> +
> +This driver is for hi6220 SoC which contain 4 thermal sensor.
> +
> + 1. sensor 0: local sensor;
> + 2. sensor 1: remote sensor for ACPU cluster 1;
> + 3. sensor 2: remote sensor for ACPU cluster 2;
> + 4. sensor 3: remote sensor for GPU.
> +
> +Every sensor use one child node to represent it, so thermal sensor include
> +parent node and four child node. The parent node describe common feature and
> +child node describe private feature for thermal sensor;
> +
> +** Required properties :
> +
> +- compatible : "hisilicon,tsensor";
> +- reg : address range of the thermal sensor registers;
Is there jsut the one block?
> +- interrupt : Standard way to define interrupt numbr;
Describe what the interrupt logically is from the PoV of this device. We
all know what an interrupt is in abstract.
> +- clock-names : Should be "thermal_clk".
What is the clock input actually called on the data sheet?
Is this the only clock input?
No regulators or other inputs we need to describe?
> + See: Documentation/devicetree/bindings/resource-names.txt;
Drop this, it's irrelevant.
> +- clocks : Phandle of the clock used by the thermal sensor.
Define this in terms of clock-names.
> + See: Documentation/devicetree/bindings/clock/clock-bindingm.txt
Drop this. This is pointless, exepcially given the typo.
> +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description;
Define what the permitted values are. This is useless as-is.
> +
> +** Required properties for child nodes :
> +
> +- hisilicon,tsensor-id : the index of thermal senor;
As with #thermal-sensor-cells, this description is incomplete.
> +- hisilicon,tsensor-thres-temp : the interrupt threshold temperature of
> + thermal senor;
> +- hisilicon,tsensor-reset-temp : the reset temperature of the hardware SoC;
NAK. These do not belong on the sensor.
> +- hisilicon,tsensor-bind-irq : systerm interrupt binding thermal sensor;
NAK. I've tried a few times, but I still can't figure out what this is
intended to mean. I don't see what this could possibly mean that would
be reasonable to describe.
Mark.
> +
> +Example :
> +
> + tsensor: tsensor@0,f7030700 {
> + compatible = "hisilicon,tsensor";
> + reg = <0x0 0xf7030700 0x0 0x1000>;
> + interrupts = <0 7 0x4>;
> + clocks = <&clock_sys HI6220_TSENSOR_CLK>;
> + clock-names = "thermal_clk";
> + #thermal-sensor-cells = <1>;
> +
> + local_sensor {
> + hisilicon,tsensor-id = <0>;
> + hisilicon,tsensor-lag-value = <10>;
> + hisilicon,tsensor-thres-temp = <35000>;
> + hisilicon,tsensor-reset-temp = <100000>;
> + hisilicon,tsensor-bind-irq;
> + }
> + .......
> + }
> --
> 1.9.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
