The board level reset on systems using the RTL9302 can be driven via the
switch. Use a syscon-reboot node to represent this.
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
Notes:
Changes in v3:
- None
Changes in v2:
- drop redundant status = "okay"
arch/mips/boot/dts/realtek/rtl930x.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi
index f271940f82be..cf1b38b6c353 100644
--- a/arch/mips/boot/dts/realtek/rtl930x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi
@@ -29,6 +29,17 @@ lx_clk: clock-175mhz {
#clock-cells = <0>;
clock-frequency = <175000000>;
};
+
+ switch0: switch@1b000000 {
+ compatible = "realtek,rtl9302c-switch", "syscon", "simple-mfd";
+ reg = <0x1b000000 0x10000>;
+
+ reboot {
+ compatible = "syscon-reboot";
+ offset = <0x0c>;
+ value = <0x01>;
+ };
+ };
};
&soc {
--
2.46.1
