On Thu, Mar 19, 2015 at 03:31:50AM +0000, Frank Rowand wrote: > From: Frank Rowand <frank.rowand@xxxxxxxxxxxxxx> > > Documentation of bindings in node /chosen are scattered in several bindings > files. If not already in Documentation/devicetree/bindings/chosen.txt, add > a pointer in that file to where the property and node bindings are described. > > This is a clean up in anticipation of adding another node binding in /chosen. > > Signed-off-by: Frank Rowand <frank.rowand@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/chosen.txt | 31 +++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > Index: b/Documentation/devicetree/bindings/chosen.txt > =================================================================== > --- a/Documentation/devicetree/bindings/chosen.txt > +++ b/Documentation/devicetree/bindings/chosen.txt > @@ -44,3 +44,34 @@ Implementation note: Linux will look for > on PowerPC "stdout" if "stdout-path" is not found. However, the > "linux,stdout-path" and "stdout" properties are deprecated. New platforms > should only use the "stdout-path" property. > + > + > +Properties documented in other bindings > +--------------------------------------- > +#address-cells video/simple-framebuffer-sunxi.txt > + > +#size-cells video/simple-framebuffer-sunxi.txt > + > +bootargs booting-without-of.txt > + usage-model.txt > + > +initrd-end usage-model.txt > +initrd-start usage-model.txt > + > +interrupt-controller (obsolete) booting-without-of.txt > + > +linux,pci-probe-only pci/host-generic-pci.txt > + > +linux,stdout-path booting-without-of.txt > + > +ranges video/simple-framebuffer-sunxi.txt > + > +stdout-path video/simple-framebuffer.txt The usual form of stdout-path is documented immediately above this section. That should probably be updated to refer to the video/simple-framebuffer.txt case. Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
