From: Ricky CX Wu <ricky.cx.wu.wiwynn@xxxxxxxxx>
Enable interrupt setting and add GPIO line name for pca9555 for the I/O
expanders on Medusa board.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@xxxxxxxxx>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..9292f42a39dc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -298,6 +298,20 @@ gpio@20 {
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
+ "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
+ "FAN_BOARD_0_REVISION_1_R",
+ "FAN_BOARD_1_REVISION_0_R",
+ "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
+ "RST_LED_CONTROL_FAN_BOARD_0_N",
+ "RST_LED_CONTROL_FAN_BOARD_1_N",
+ "RST_IOEXP_FAN_BOARD_0_N",
+ "RST_IOEXP_FAN_BOARD_1_N",
+ "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
+ "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+ "", "";
};
gpio@21 {
@@ -305,6 +319,19 @@ gpio@21 {
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
+ "HSC_OCP_SLOT_ODD_GPIO2",
+ "HSC_OCP_SLOT_ODD_GPIO3",
+ "HSC_OCP_SLOT_EVEN_GPIO1",
+ "HSC_OCP_SLOT_EVEN_GPIO2",
+ "HSC_OCP_SLOT_EVEN_GPIO3",
+ "ADC_TYPE_0_R", "ADC_TYPE_1_R",
+ "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
+ "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
+ "DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
+ "", "";
};
gpio@22 {
@@ -312,6 +339,16 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
+ "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
+ "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
+ "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
+ "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
+ "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
+ "EN_P48V_AUX_0", "EN_P48V_AUX_1",
+ "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
};
gpio@23 {
@@ -319,6 +356,16 @@ gpio@23 {
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
+ "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
+ "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
+ "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
+ "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
+ "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
+ "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
+ "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
};
temperature-sensor@48 {
--
2.25.1
