On Wed, 18 Sep 2024 11:29:31 +1200, Chris Packham wrote: > An extension of the RTL9300 SoC is to support multiplexing by selecting > the SDA pins that are being used dynamically. Add a binding that allows > us to describe hardware that makes use of this. > > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > --- > .../bindings/i2c/realtek,rtl9300-i2c-mux.yaml | 82 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 83 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c-mux.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c-mux.example.dts:22.25-28.13: Warning (unit_address_vs_reg): /example-0/switch@1b000000/i2c@36c: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c-mux.example.dtb: /example-0/switch@1b000000: failed to match any schema with compatible: ['realtek,rtl9302c-switch', 'syscon', 'simple-mfd'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240917232932.3641992-5-chris.packham@xxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
