Re: [PATCH v4 0/4] Add initial support for Rockchip RK3528 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey,

Am Dienstag, 17. September 2024, 22:14:36 CEST schrieb Yao Zi:
> On Thu, Aug 29, 2024 at 09:27:01AM +0000, Yao Zi wrote:
> > Rockchip RK3528 is a quad-core ARM Cortex-A53 SoC designed for
> > multimedia application. This series add a basic device tree with CPU,
> > interrupts and UART nodes for it and is able to boot into a kernel with
> > only UART console.
> > 
> > Has been tested on Radxa E20C board[1] with vendor U-boot, successfully
> > booted into initramfs with this log[2].

> Ping on this thread. Is it possible to get this merged in v6.12? Or
> anything else I need to do?

sadly nope. From a timeline point of view things should ideally be in the
Rockchip tree by -rc6 . Which then move to the soc tree and from there
to Linus' tree.

There is this rule that all new development for a -rc1 kernel should be
present in linux-next _before_ the merge-window opens.

The thing we need to figure out for your series is the uart binding,
because that _should_ go through the tree handling serial drivers.
Greg is in your cc list but with the amount of mail he gets, I don't
think he has single-parts of patch series on his radar.

So I guess the easiest way would be to send the uart-binding from patch 1
as a completely separate patch with adapted Cc list, so that it's obvious
this should go through the serial tree.


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux