Re: [PATCH v5 00/10] riscv: add initial support for SpacemiT K1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 29 Jul 2024 17:28:03 PDT (-0700), dlan@xxxxxxxxxx wrote:
SpacemiT K1 is an ideal chip for some new extension such as RISC-V Vector
1.0 and Zicond evaluation now. Add initial support for it to allow more
people to participate in building drivers to mainline for it.

This kernel has been tested upon Banana Pi BPI-F3 board on vendor U-Boot
bootflow generated by Armbian SDK[1] and patched OpenSBI[2] to enable
Zicboz, which does not in the vendor dts on its U-Boot. Then successfully
booted to busybox on initrd with this log[3].

As previous discussion in patch v1[4], maintainer expect more basic drivers
ready before really merging it, which would be fine. For other follow-up patches,
that are clk, pinctrl/gpio, reset.. My current goal would target at a headless
system including SD card, emmc, and ethernet.

Acked-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx>

if you guys want to take this through some SOC tree. I'm not really sure what the bar is for SOC support to get merged, but I'd be happy to just see this booting at all -- we've got a bunch of them floating around and the vendor kernels are pretty crusty, so anything's an improvement on my end.

In this series, the uart node has no 'fifo-size', 'tx-threshold' property populated,
will add them once this patch is resolved, see thread [5]

P.S: talked to Yangyu, I will help and take care of this patch series, thanks

---
Changes in v5:
- fix cache-sets in dts
- collect Rob's Ack
- rebase to 6.11-rc1
- Link to v4: https://lore.kernel.org/r/20240709-k1-01-basic-dt-v4-0-ae5bb5e56aaf@xxxxxxxxxx

Changes in v4:
 - add i/d-cache, l2-cache info
 - squash uart1 dts node
 - update tags
 - Link to v3: https://lore.kernel.org/r/20240703-k1-01-basic-dt-v3-0-12f73b47461e@xxxxxxxxxx

Changes in v3:
 - fix dt_binding_check error
 - fix plic compatible
 - fix uart node name
 - add uart1 dts node
 - collect tags
 - Link to v2: https://lore.kernel.org/r/20240627-k1-01-basic-dt-v2-0-cc06c7555f07@xxxxxxxxxx

Changes in v2:
 - fix timebase-frequency according to current setting
 - add other uart dt nodes, fix input frequency
 - introduce new uart compatible for K1 SoC
 - add 'k1' prefix to bananapi-f3.dts
 - fix k1-clint compatible
 - fix some typos
 - Link to v1: https://lore.kernel.org/r/tencent_BC64B7B1876F5D10479BD19112F73F262505@xxxxxx

Link: https://github.com/BPI-SINOVOIP/armbian-build/tree/v24.04.30 [1]
Link: https://gist.github.com/cyyself/a07096e6e99c949ed13f8fa16d884402 [2]
Link: https://gist.github.com/cyyself/a2201c01f5c8955a119641f97b7d0280 [3]
Link: https://lore.kernel.org/r/20240618-hardwood-footrest-ab5ec5bce3cf@wendy [4]
Link: https://lore.kernel.org/linux-riscv/20240706082928.2238-1-jszhang@xxxxxxxxxx/ [5]

Signed-off-by: Yangyu Chen <cyy@xxxxxxxxxxxx>
Signed-off-by: Yixun Lan <dlan@xxxxxxxxxx>

---
Yangyu Chen (9):
      dt-bindings: vendor-prefixes: add spacemit
      dt-bindings: riscv: Add SpacemiT X60 compatibles
      dt-bindings: riscv: add SpacemiT K1 bindings
      dt-bindings: timer: Add SpacemiT K1 CLINT
      dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
      riscv: add SpacemiT SoC family Kconfig support
      riscv: dts: add initial SpacemiT K1 SoC device tree
      riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
      riscv: defconfig: enable SpacemiT SoC

Yixun Lan (1):
      dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible

 .../interrupt-controller/sifive,plic-1.0.0.yaml    |   1 +
 Documentation/devicetree/bindings/riscv/cpus.yaml  |   1 +
 .../devicetree/bindings/riscv/spacemit.yaml        |  28 ++
 Documentation/devicetree/bindings/serial/8250.yaml |   4 +-
 .../devicetree/bindings/timer/sifive,clint.yaml    |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/riscv/Kconfig.socs                            |   5 +
 arch/riscv/boot/dts/Makefile                       |   1 +
 arch/riscv/boot/dts/spacemit/Makefile              |   2 +
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts    |  19 +
 arch/riscv/boot/dts/spacemit/k1.dtsi               | 459 +++++++++++++++++++++
 arch/riscv/configs/defconfig                       |   1 +
 12 files changed, 523 insertions(+), 1 deletion(-)
---
base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b
change-id: 20240626-k1-01-basic-dt-1aa31eeebcd2

Best regards,




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux