On 17/09/2024 11:49, Erez Geva wrote: > From: Erez Geva <ErezGeva2@xxxxxxxxx> > > Some flash devices need OTP parameters in device tree. > As we can not deduce the parameters based on JEDEC ID or SFDP. > > Signed-off-by: Erez Geva <ErezGeva2@xxxxxxxxx> > --- > .../bindings/mtd/jedec,spi-nor.yaml | 37 +++++++++++++++++++ > 1 file changed, 37 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml > index 6e3afb42926e..d502b7fab2ce 100644 > --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml > +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml > @@ -90,6 +90,43 @@ properties: > the SRWD bit while writing the status register. WP# signal hard strapped to GND > can be a valid use case. > > + opt_n_regions: No underscores, but hyphens. > + type: u32 It does not look like you tested the bindings, at least after quick look. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Maybe you need to update your dtschema and yamllint. Best regards, Krzysztof
