Code expects array only with 2 items which should be checked.
But also item checking is not working as it should likely because of
incorrect items description.
Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema")
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
Changes in v3:
- Remove incorrectly assigned value for the first item 50/100 because of
my testing
Changes in v2:
- Remove maxItems properties which are not needed
- Add stable ML to CC
.../devicetree/bindings/serial/rs485.yaml | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index 9418fd66a8e9..b93254ad2a28 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
description: prop-encoded-array <a b>
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- items:
- - description: Delay between rts signal and beginning of data sent in
- milliseconds. It corresponds to the delay before sending data.
- default: 0
- maximum: 100
- - description: Delay between end of data sent and rts signal in milliseconds.
- It corresponds to the delay after sending data and actual release
- of the line.
- default: 0
- maximum: 100
+ - description: Delay between rts signal and beginning of data sent in
+ milliseconds. It corresponds to the delay before sending data.
+ default: 0
+ maximum: 100
+ - description: Delay between end of data sent and rts signal in milliseconds.
+ It corresponds to the delay after sending data and actual release
+ of the line.
+ default: 0
+ maximum: 100
rs485-rts-active-high:
description: drive RTS high when sending (this is the default).
--
2.43.0
