On Sat, 2024-09-14 at 17:06 +0100, Jonathan Cameron wrote:
> On Fri, 13 Sep 2024 11:57:02 +0200
> Emil Gedenryd <emil.gedenryd@xxxxxxxx> wrote:
>
> > The opt3001 driver uses predetermined full-scale range values to
> > determine what exponent to use for event trigger threshold values.
> > The problem is that one of the values specified in the datasheet is
> > missing from the implementation. This causes larger values to be
> > scaled down to an incorrect exponent, effectively reducing the
> > maximum settable threshold value by a factor of 2.
> >
> > Add missing full-scale range array value.
> >
> > Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor")
> > Signed-off-by: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
> Applied to the fixes-togreg branch of iio.git and marked for stable.
> I'll probably send a pull request with this in shortly after rc1.
>
> Jonathan
>
>
Great, thank you.
Best Regards,
Emil
