Re: [PATCH 00/21] Adding support of ADI ARMv8 ADSP-SC598 SoC.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/09/2024 23:04, Rob Herring (Arm) wrote:
> 
> On Thu, 12 Sep 2024 19:24:45 +0100, Arturs Artamonovs wrote:
>> This set of patches based on ADI fork of Linux Kerenl that support family of ADSP-SC5xx
>> SoC's and used by customers for some time . Patch series contains minimal set
>> of changes to add ADSP-SC598 support to upstream kernel. This series include
>> UART,I2C,IRQCHIP,RCU drivers and device-tree to be able boot on EV-SC598-SOM
>> board into serial shell and able to reset the board. Current SOM board
>> requires I2C expander to enable UART output.
>>
>> UART,I2C and PINCTRL drivers are based on old Blackfin drivers with
>> ADSP-SC5xx related bug fixes and improvments.
>>
>> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@xxxxxxxxxx>
>> ---
>> Arturs Artamonovs (21):
>>       arm64: Add ADI ADSP-SC598 SoC
>>       reset: Add driver for ADI ADSP-SC5xx reset controller
>>       dt-bindigs: arm64: adi,sc598 bindings
>>       dt-bindings: arm64: adi,sc598: Add ADSP-SC598 SoC bindings
>>       clock:Add driver for ADI ADSP-SC5xx PLL
>>       include: dt-binding: clock: add adi clock header file
>>       clock: Add driver for ADI ADSP-SC5xx clock
>>       dt-bindings: clock: adi,sc5xx-clocks: add bindings
>>       gpio: add driver for ADI ADSP-SC5xx platform
>>       dt-bindings: gpio: adi,adsp-port-gpio: add bindings
>>       irqchip: Add irqchip for ADI ADSP-SC5xx platform
>>       dt-bindings: irqchip: adi,adsp-pint: add binding
>>       pinctrl: Add drivers for ADI ADSP-SC5xx platform
>>       dt-bindings: pinctrl: adi,adsp-pinctrl: add bindings
>>       i2c: Add driver for ADI ADSP-SC5xx platforms
>>       dt-bindings: i2c: add i2c/twi driver documentation
>>       serial: adi,uart: Add driver for ADI ADSP-SC5xx
>>       dt-bindings: serial: adi,uart4: add adi,uart4 driver documentation
>>       arm64: dts: adi: sc598: add device tree
>>       arm64: defconfig: sc598 add minimal changes
>>       MAINTAINERS: add adi sc5xx maintainers
>>
>>  .../devicetree/bindings/arm/analog/adi,sc5xx.yaml  |   24 +
>>  .../bindings/clock/adi,sc5xx-clocks.yaml           |   65 ++
>>  .../bindings/gpio/adi,adsp-port-gpio.yaml          |   69 ++
>>  Documentation/devicetree/bindings/i2c/adi,twi.yaml |   71 ++
>>  .../interrupt-controller/adi,adsp-pint.yaml        |   51 +
>>  .../bindings/pinctrl/adi,adsp-pinctrl.yaml         |   83 ++
>>  .../devicetree/bindings/serial/adi,uart.yaml       |   85 ++
>>  .../bindings/soc/adi/adi,reset-controller.yaml     |   38 +
>>  MAINTAINERS                                        |   22 +
>>  arch/arm64/Kconfig.platforms                       |   13 +
>>  arch/arm64/boot/dts/Makefile                       |    1 +
>>  arch/arm64/boot/dts/adi/Makefile                   |    2 +
>>  arch/arm64/boot/dts/adi/sc598-som-ezkit.dts        |   14 +
>>  arch/arm64/boot/dts/adi/sc598-som.dtsi             |   58 ++
>>  arch/arm64/boot/dts/adi/sc59x-64.dtsi              |  367 +++++++
>>  arch/arm64/configs/defconfig                       |    6 +
>>  drivers/clk/Kconfig                                |    9 +
>>  drivers/clk/Makefile                               |    1 +
>>  drivers/clk/adi/Makefile                           |    4 +
>>  drivers/clk/adi/clk-adi-pll.c                      |  151 +++
>>  drivers/clk/adi/clk-adi-sc598.c                    |  329 ++++++
>>  drivers/clk/adi/clk.h                              |   99 ++
>>  drivers/gpio/Kconfig                               |    8 +
>>  drivers/gpio/Makefile                              |    1 +
>>  drivers/gpio/gpio-adi-adsp-port.c                  |  145 +++
>>  drivers/i2c/busses/Kconfig                         |   17 +
>>  drivers/i2c/busses/Makefile                        |    1 +
>>  drivers/i2c/busses/i2c-adi-twi.c                   |  940 ++++++++++++++++++
>>  drivers/irqchip/Kconfig                            |    9 +
>>  drivers/irqchip/Makefile                           |    2 +
>>  drivers/irqchip/irq-adi-adsp.c                     |  310 ++++++
>>  drivers/pinctrl/Kconfig                            |   12 +
>>  drivers/pinctrl/Makefile                           |    1 +
>>  drivers/pinctrl/pinctrl-adsp.c                     |  919 +++++++++++++++++
>>  drivers/reset/Makefile                             |    1 +
>>  drivers/soc/Makefile                               |    1 +
>>  drivers/soc/adi/Makefile                           |    5 +
>>  drivers/soc/adi/system.c                           |  257 +++++
>>  drivers/tty/serial/Kconfig                         |   19 +-
>>  drivers/tty/serial/Makefile                        |    1 +
>>  drivers/tty/serial/adi_uart.c                      | 1045 ++++++++++++++++++++
>>  include/dt-bindings/clock/adi-sc5xx-clock.h        |   93 ++
>>  include/dt-bindings/pinctrl/adi-adsp.h             |   19 +
>>  include/linux/soc/adi/adsp-gpio-port.h             |   85 ++
>>  include/linux/soc/adi/cpu.h                        |  107 ++
>>  include/linux/soc/adi/rcu.h                        |   55 ++
>>  include/linux/soc/adi/sc59x.h                      |  147 +++
>>  include/linux/soc/adi/system_config.h              |   65 ++
>>  include/uapi/linux/serial_core.h                   |    3 +
>>  49 files changed, 5829 insertions(+), 1 deletion(-)
>> ---
>> base-commit: da3ea35007d0af457a0afc87e84fddaebc4e0b63
>> change-id: 20240909-test-8ec5f76fe6d2
>>
>> Best regards,
>> --
>> Arturs Artamonovs <arturs.artamonovs@xxxxxxxxxx>
>>
>>
>>
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> New warnings running 'make CHECK_DTBS=y adi/sc598-som-ezkit.dtb' for 20240912-test-v1-0-458fa57c8ccf@xxxxxxxxxx:
> 
> arch/arm64/boot/dts/adi/sc598-som-ezkit.dtb: /scb-bus/sec@31089000: failed to match any schema with compatible: ['adi,system-event-controller']

This must be addressed and fixed.

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux