Re: [PATCH net-next v3 0/2] net: phy: Support master-slave config via device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Sep 15, 2024 at 08:41:42PM +0200, Andrew Lunn wrote:
> On Sun, Sep 15, 2024 at 06:06:30PM +0200, Jakub Kicinski wrote:
> > On Fri, 13 Sep 2024 10:40:20 +0200 Oleksij Rempel wrote:
> > > This patch series adds support for configuring the master/slave role of
> > > PHYs via the device tree. A new `master-slave` property is introduced in
> > > the device tree bindings, allowing PHYs to be forced into either master
> > > or slave mode. This is particularly necessary for Single Pair Ethernet
> > > (SPE) PHYs (1000/100/10Base-T1), where hardware strap pins may not be
> > > available or correctly configured, but it is applicable to all PHY
> > > types.
> > 
> > I was hoping we'd see some acks here in time, but now Linus cut the 6.11
> > final so the 6.12 game is over now:
> 
> The device tree binding is not decided on yet. So deferred is correct.

No problem. See you on LPC, my flight starting right now.

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux