This L2 controller handles multiplexing a few different interrupts. We
also need it for configuring the interrupt forwarding masks for the
UART.
With this, we can *now* boot BCM7445 to a prompt using the upstream
kernel + DTB.
Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx>
---
arch/arm/boot/dts/bcm7445.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index b183dc99111a..9eaeac8dce1b 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -96,6 +96,18 @@
"syscon";
reg = <0x452000 0x100>;
};
+
+ irq0_intc: interrupt-controller@f040a780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <1>;
+ reg = <0x40a780 0x8>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 0x45 0x0>,
+ <GIC_SPI 0x43 0x0>;
+ brcm,int-map-mask = <0x25c>, <0x7000000>;
+ brcm,int-fwd-mask = <0x70000>;
+ };
};
smpboot {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
